PartsTable
Technical Data Sheet
Download PDF

6768114 — STUD,PLAIN

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

6768114: STUD,PLAIN.

The STUD,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740, thread_class: 2A NUT THREAD A, thread_length: 1.250 INCHES MINIMUM NUT THREAD IN, overall_length: 2.625 INCHES NOMINAL IN, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM, thread_direction: RIGHT-HAND STUD THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5307-00-637-9986, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6768114
NSN: 5307-00-637-9986
FSC: 5307 — Studs
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 8740
thread_class2A NUT THREAD A
thread_length1.250 INCHES MINIMUM NUT THREAD IN
overall_length2.625 INCHES NOMINAL IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND STUD THREAD
nominal_thread_size0.500 INCHES STUD THREAD IN
thread_pitch_diameters+0.4621 TO 0.4637 INCHES STUD THREAD IN
thread_quantity_per_inch20 NUT THREAD
thread_series_designatorUNS STUD THREAD
material_document_and_classificationASTM A331 ASSN STD SINGLE MATERIAL RESPONSE
NSN5307-00-637-9986
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 6768114 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.250 INCHES MINIMUM NUT THREAD IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD PITCH DIAMETERS: +0.4621 TO 0.4637 INCHES STUD THREAD IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD DIRECTION: RIGHT-HAND STUD THREAD
TECHNICAL CHARACTERISTICS
THREAD LENGTH1.250 INCHES MINIMUM NUT THREAD IN
THREAD LENGTH0.938 INCHES MINIMUM STUD THREAD IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD PITCH DIAMETERS+0.4621 TO 0.4637 INCHES STUD THREAD IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A331 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL LENGTH2.625 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND STUD THREAD
THREAD DIRECTIONRIGHT-HAND NUT THREAD
NOMINAL THREAD SIZE0.500 INCHES NUT THREAD IN
NOMINAL THREAD SIZE0.500 INCHES STUD THREAD IN
SUBSTITUTES & CROSS-REFERENCES 2
7708182Reference document
Same NSN cross-reference
Reference document — Secondary reference
5307006379986Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6768114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6768114?
6768114 is a STUD,PLAIN.
What parts can replace 6768114?
There are 2 known substitutes for 6768114: 7708182, 5307006379986. Substitute compatibility should be verified for your specific system.
What is the NSN for 6768114?
6768114 is cataloged in the U.S. Government catalog under NSN 5307-00-637-9986. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6768114

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.