PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 67678
67678 ✓ Verified by PartsTable
Disguise · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SOCKET,SOCKET WRENCH is a Disguise industrial component. Key specifications include material: STEEL OVERALL, overall_length: 2.000 INCHES NOMINAL IN, drive_end_shape: SQUARE SINGLE END INTERNAL, style_designator: INTERNAL-INTERNAL, features_provided: MANUAL TOOL, surface_treatment: CHROMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-514-4884, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
67678
NSN: 5330-00-514-4884
FSC: 5330
CAGE: 80254 — TEXTRON LYCOMING INC WILLIAMSPORT PLANT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length2.000 INCHES NOMINAL IN
drive_end_shapeSQUARE SINGLE END INTERNAL
style_designatorINTERNAL-INTERNAL
features_providedMANUAL TOOL
surface_treatmentCHROMIUM OVERALL
drive_surface_size0.250 INCHES NOMINAL SINGLE END IN
wrenching_surface_size0.281 INCHES NOMINAL SINGLE END IN
wrenching_surface_shape6 POINT SINGLE END INTERNAL
drive_end_outside_diameter0.510 INCHES MAXIMUM IN
nondefinitive_spec/std_data1 TYPE
specification/standard_data05047-ASME B107.110 CAT 1 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5330-00-514-4884
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 67678 MFR: Disguise ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.005 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 2.800 INCHES MINIMUM AND 2.820 INCHES MAXIMUM IN
•
BOLT CIRCLE DIAMETER: 2.370 INCHES MINIMUM AND 2.390 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.930 INCHES MINIMUM AND 1.950 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.005 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER2.800 INCHES MINIMUM AND 2.820 INCHES MAXIMUM IN
BOLT CIRCLE DIAMETER2.370 INCHES MINIMUM AND 2.390 INCHES MAXIMUM IN
APERTURE DIAMETER1.930 INCHES MINIMUM AND 1.950 INCHES MAXIMUM IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
BOLT HOLE QUANTITY6
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
43574Interchangeable
interchangeable cross-reference
interchangeable
11204Interchangeable
interchangeable cross-reference
interchangeable
00943574000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 67678?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67678?
67678 is a SOCKET,SOCKET WRENCH manufactured by Disguise.
What parts can replace 67678?
There are 3 known substitutes for 67678: 43574, 11204, 00943574000. Substitute compatibility should be verified for your specific system.
What is the NSN for 67678?
67678 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-514-4884. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 67678

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026