PartsTable
Technical Data Sheet
Download PDF

6767593 — SEAL RING,METAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6767593: SEAL RING,METAL.

The SEAL RING,METAL is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, ring_style: EXPANDING CONCENTRIC, joint_style: INTERLOCKING JOINT, overall_width: 0.0920 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM IN, outside_diameter: 2.062 INCHES NOMINAL IN, surface_treatment: TIN OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-692-5279, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6767593
NSN: 5330-00-692-5279
FSC: 5330 — Packing and Gasket Materials
CAGE: 73342 — ALLISON TRANSMISSION INC DBA ALLISON TRANSMISSION, INC (USA)
SPECIFICATIONS
materialIRON OVERALL
ring_styleEXPANDING CONCENTRIC
joint_styleINTERLOCKING JOINT
overall_width0.0920 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM IN
outside_diameter2.062 INCHES NOMINAL IN
surface_treatmentTIN OVERALL
radial_wall_thickness0.0950 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM IN
cross-sectional_shape_stylePLAIN RECTANGULAR, STRAIGHT FACE
NSN5330-00-692-5279
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6767593 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: PLAIN RECTANGULAR, STRAIGHT FACE
•
OUTSIDE DIAMETER: 2.062 INCHES NOMINAL IN
•
JOINT STYLE: INTERLOCKING JOINT
•
RADIAL WALL THICKNESS: 0.0950 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM IN
•
RING STYLE: EXPANDING CONCENTRIC
•
SURFACE TREATMENT: TIN OVERALL
•
MATERIAL: IRON OVERALL
TECHNICAL CHARACTERISTICS
OVERALL WIDTH0.0920 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEPLAIN RECTANGULAR, STRAIGHT FACE
OUTSIDE DIAMETER2.062 INCHES NOMINAL IN
JOINT STYLEINTERLOCKING JOINT
RADIAL WALL THICKNESS0.0950 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM IN
RING STYLEEXPANDING CONCENTRIC
SURFACE TREATMENTTIN OVERALL
MATERIALIRON OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
716157Reference document
Same NSN cross-reference
Reference document — Secondary reference
7708895Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6767593?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6767593?
6767593 is a SEAL RING,METAL.
What parts can replace 6767593?
There are 2 known substitutes for 6767593: 716157, 7708895. Substitute compatibility should be verified for your specific system.
What is the NSN for 6767593?
6767593 is cataloged in the U.S. Government catalog under NSN 5330-00-692-5279. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6767593