PartsTable
Technical Data Sheet
Download PDF

6760S — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6760S: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, outside_diameter: 2.072 INCHES NOMINAL IN, housing_bore_diameter: 2.062 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-543-3151, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6760S
NSN: 5330-00-543-3151
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.250 INCHES NOMINAL IN
outside_diameter2.072 INCHES NOMINAL IN
housing_bore_diameter2.062 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3500 FEET PER MINUTE FT
NSN5330-00-543-3151
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6760S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 2.072 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.062 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3500 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER2.072 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.062 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3500 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 1
13596Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6760S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6760S?
6760S is a SEAL,PLAIN ENCASED.
What parts can replace 6760S?
There is 1 known substitute for 6760S: 13596. Substitute compatibility should be verified for your specific system.
What is the NSN for 6760S?
6760S is cataloged in the U.S. Government catalog under NSN 5330-00-543-3151. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6760S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.