PartsTable
Technical Data Sheet
Download PDF

676049-3 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

676049-3: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.750 INCHES NOMINAL IN, first_leg_length: 1.500 INCHES NOMINAL IN, second_leg_style: CUT OUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-062-5621, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
676049-3
NSN: 5340-01-062-5621
FSC: 5340 — Hardware, Commercial
CAGE: 20418 — DRS SUSTAINMENT SYSTEMS, INC. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.750 INCHES NOMINAL IN
first_leg_length1.500 INCHES NOMINAL IN
second_leg_styleCUT OUT
second_leg_width1.740 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.690 INCHES NOMINAL IN
surface_treatmentENAMEL
mounting_hole_typePLAIN
first_leg_thickness0.125 INCHES NOMINAL IN
NSN5340-01-062-5621
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 676049-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.550 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.752 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.000 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
FIRST LEG CORNER RADIUS: 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
SECOND LEG CUTOUT WIDTH: 0.468 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
•
SECOND LEG CUTOUT LENGTH: 1.100 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.550 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.752 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.000 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
FIRST LEG CORNER RADIUS0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
SECOND LEG CUTOUT WIDTH0.468 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
SECOND LEG CUTOUT LENGTH1.100 INCHES NOMINAL IN
SECOND LEG WIDTH1.740 INCHES NOMINAL IN
SECOND LEG LENGTH1.690 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
12266415Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 676049-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 676049-3?
676049-3 is a BRACKET,ANGLE.
What parts can replace 676049-3?
There is 1 known substitute for 676049-3: 12266415. Substitute compatibility should be verified for your specific system.
What is the NSN for 676049-3?
676049-3 is cataloged in the U.S. Government catalog under NSN 5340-01-062-5621. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 676049-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.