PartsTable
Technical Data Sheet
Download PDF

676005 — TRANSFORMER,POWER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

676005: TRANSFORMER,POWER.

The TRANSFORMER,POWER is a the manufacturer industrial component. Key specifications include width: 2.688 INCHES MINIMUM AND 2.698 INCHES MAXIMUM IN, material: ALUMINUM ALLOY, end_style: SPLIT LOOP WITH THREADED BUSHING, thickness: 0.032 INCHES NOMINAL IN, bend_radius: 3.966 INCHES MINIMUM AND 3.971 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-335-4311, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
676005
NSN: 5340-00-335-4311
NIINs: 003354311, 006476695
FSC: 5340 — Hardware, Commercial
CAGE: 63728 — SEALCRAFT CORPORATION (USA)
SPECIFICATIONS
width2.688 INCHES MINIMUM AND 2.698 INCHES MAXIMUM IN
materialALUMINUM ALLOY
end_styleSPLIT LOOP WITH THREADED BUSHING
thickness0.032 INCHES NOMINAL IN
bend_radius3.966 INCHES MINIMUM AND 3.971 INCHES MAXIMUM IN
basic_shape_styleC
NSN5340-00-335-4311
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 676005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END STYLE: LOOP WITH BOLT
•
BASIC SHAPE STYLE: C
•
WIDTH: 2.688 INCHES MINIMUM AND 2.698 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY
•
BEND RADIUS: 3.966 INCHES MINIMUM AND 3.971 INCHES MAXIMUM IN
•
THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
END STYLELOOP WITH BOLT
END STYLESPLIT LOOP WITH THREADED BUSHING
BASIC SHAPE STYLEC
WIDTH2.688 INCHES MINIMUM AND 2.698 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY
BEND RADIUS3.966 INCHES MINIMUM AND 3.971 INCHES MAXIMUM IN
THICKNESS0.032 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
2920003354311Reference document
Same NSN cross-reference
Reference document — Informative reference only
5340003354311Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 676005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 676005?
676005 is a TRANSFORMER,POWER.
What parts can replace 676005?
There are 2 known substitutes for 676005: 2920003354311, 5340003354311. Substitute compatibility should be verified for your specific system.
What is the NSN for 676005?
676005 is cataloged in the U.S. Government catalog under NSN 5340-00-335-4311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 676005