PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 676004
676004 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The LEVER,DOOR,DRAG CHUTE is a the manufacturer industrial component. Key specifications include end_item_identification: JET ENGINES (J52). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 1730-00-017-8490, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
676004
NSN: 1730-00-017-8490
FSC: 1730
CAGE: 76823 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN IS DIV NORTHROP GRUMMAN AERONAUTICS SYSTEMS (USA)
SPECIFICATIONS
end_item_identificationJET ENGINES (J52)
NSN1730-00-017-8490
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available LEVER,DOOR,DRAG CHUTE TITLE COMPONENT PN 676004 MFR LEVER,DOOR,DRAG CHUTE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: PLATE,LUG,HANDLE,PIN ARE STEEL; PAD MATERIAL CHLOROPRENE; HANDLE LENGTH IS APPROXIMATELY 18.500 INCHES LONG; 45.0 DEGREE ANGLE AT BASE; 4.000 INCHES FROM BASE PLATE HANDLE IS 3.250 INCH RADII AT 15.0 DEGREE BEND; TOP OF HANDLE IS CHAMFERED 45.0 DEGREES; LUG IS WELDED ON HANDLE 7.320 INCHES UP FROM BOTTOM OF HANDLE W/DRILLED THROUGH HOLE 0.250 INCH DIAMETER TO ACCOMODATE PIN WHICH IS TACK WELDED IN PLACE IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONF5 AIRCRAFT
GENERAL CHARACTERISTICS ITEM DESCRIPTIONPLATE,LUG,HANDLE,PIN ARE STEEL; PAD MATERIAL CHLOROPRENE; HANDLE LENGTH IS APPROXIMATELY 18.500 INCHES LONG; 45.0 DEGREE ANGLE AT BASE; 4.000 INCHES FROM BASE PLATE HANDLE IS 3.250 INCH RADII AT 15.0 DEGREE BEND; TOP OF HANDLE IS CHAMFERED 45.0 DEGREES; LUG IS WELDED ON HANDLE 7.320 INCHES UP FROM BOTTOM OF HANDLE W/DRILLED THROUGH HOLE 0.250 INCH DIAMETER TO ACCOMODATE PIN WHICH IS TACK WELDED IN PLACE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
N14735PC4182Interchangeable
interchangeable cross-reference
interchangeable
4182Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-81248Interchangeable
interchangeable cross-reference
interchangeable
GTP25Interchangeable
interchangeable cross-reference
interchangeable
8717Interchangeable
interchangeable cross-reference
interchangeable
676004Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 676004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 676004?
676004 is a LEVER,DOOR,DRAG CHUTE.
What parts can replace 676004?
There are 16 known substitutes for 676004: N14735PC4182, 4182, MIL-DTL-81248 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 676004?
676004 is cataloged in the Federal Logistics Information System (FLIS) under NSN 1730-00-017-8490. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 676004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026