PartsTable
Technical Data Sheet
Download PDF

675762 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

675762: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1040 OR STEEL COMP 1137 OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNEF, hardness_rating: 225.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-471-4079, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
675762
NSN: 5340-00-471-4079
NIINs: 004714079, 007521234
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 1040 OR STEEL COMP 1137 OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNEF
hardness_rating225.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM
thread_directionRIGHT-HAND
countersink_angle89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM NUT
surface_treatmentZINC OVERALL
width_across_flats1.479 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
nominal_thread_size1.000 INCHES IN
bearing_surface_typeWASHER FACED
NSN5340-00-471-4079
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 675762 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.386 INCHES MINIMUM AND 1.431 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
LOOP WIDTH0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
STYLE DESIGNATORMULTIPLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
OVERALL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIAL THICKNESS0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.386 INCHES MINIMUM AND 1.431 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.136 INCHES NOMINAL IN
MATERIALSTEEL COMP 321 BAND
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 675762?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 675762?
675762 is a CLAMP,LOOP.
What is the NSN for 675762?
675762 is cataloged in the U.S. Government catalog under NSN 5340-00-471-4079. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 675762

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.