PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 675233
675233 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include width: 0.790 INCHES NOMINAL IN, material: STEEL COMP 321, body_width: 0.370 INCHES NOMINAL IN, end_radius: 0.030 INCHES NOMINAL IN, plate_thickness: 0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN, special_features: TWO PREBENT TABS ON EACH END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0311, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
675233
NSN: 3110-00-100-0311
FSC: 3110
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
width0.790 INCHES NOMINAL IN
materialSTEEL COMP 321
body_width0.370 INCHES NOMINAL IN
end_radius0.030 INCHES NOMINAL IN
plate_thickness0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
special_featuresTWO PREBENT TABS ON EACH END
style_designatorSOCKET
mounting_hole_diameter0.320 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
cross-sectional_shape_styleFLAT
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers2.271 INCHES NOMINAL IN
NSN3110-00-100-0311
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 675233 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0938 INCHES NOMINAL IN
OVERALL WIDTH0.8750 INCHES NOMINAL IN
OUTSIDE DIAMETER3.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SPECIAL FEATURESAXIAL DISTANCE BETWEEN CENTER OF CUP CONTACT LINE AND BEARING STABILITY POINT ON SHAFT AXIS 0.3600 IN. IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
A3107Interchangeable
interchangeable cross-reference
interchangeable
210062Interchangeable
interchangeable cross-reference
interchangeable
C62106XInterchangeable
interchangeable cross-reference
interchangeable
11-7302Interchangeable
interchangeable cross-reference
interchangeable
CR77051PC190Interchangeable
interchangeable cross-reference
interchangeable
55543Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 675233?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 675233?
675233 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 675233?
There are 29 known substitutes for 675233: A3107, 210062, C62106X and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 675233?
675233 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 675233

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026