PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 673273
673273 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 0.290 INCHES MAXIMUM IN, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-353-7510, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
673273
NSN: 5305-00-353-7510
FSC: 5305
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
thread_length0.290 INCHES MAXIMUM IN
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER
washer_quantity1
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
internal_drive_styleCROSS RECESS TYPE 1
primary_washer_styleFLAT INTERNAL TEETH
NSN5305-00-353-7510
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 673273 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.372 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN
•
PRIMARY WASHER STYLE: FLAT INTERNAL TEETH
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER
•
PRIMARY WASHER MATERIAL THICKNESS: 0.022 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.190 INCHES IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
PRIMARY WASHER OUTSIDE DIAMETER0.372 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN
PRIMARY WASHER STYLEFLAT INTERNAL TEETH
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER
PRIMARY WASHER MATERIAL THICKNESS0.022 INCHES MINIMUM IN
THREAD SERIES DESIGNATORUNF
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
31742Interchangeable
interchangeable cross-reference
interchangeable
13841Interchangeable
interchangeable cross-reference
interchangeable
0R325EMInterchangeable
interchangeable cross-reference
interchangeable
2878Interchangeable
interchangeable cross-reference
interchangeable
KD31821Interchangeable
interchangeable cross-reference
interchangeable
31821Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 673273?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 673273?
673273 is a SCREW,ASSEMBLED WASHER.
What parts can replace 673273?
There are 11 known substitutes for 673273: 31742, 13841, 0R325EM and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 673273?
673273 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-353-7510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 673273

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026