PartsTable
Technical Data Sheet
PartsTable / MRO / 67322
67322 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.580 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: BALL SHAFT, pilot_length: 0.06200 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 67322
NSN: 3110-00-100-0611
FSC: 3110
CAGE: 3D6E9 — MERITOR INDUSTRIAL PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.580 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeBALL SHAFT
pilot_length0.06200 INCHES NOMINAL IN
shaft_length0.688 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
actuator_typeDOUBLE ENDED SHAFT
body_diameter1.438 INCHES NOMINAL IN
overall_width1.5000 INCHES NOMINAL IN
lateral_runout0.002 INCHES IN
NSN3110-00-100-0611
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 67322 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 7.7500 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL WIDTH1.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER7.7500 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
E396PC2Interchangeable
interchangeable cross-reference
interchangeable
30258Interchangeable
interchangeable cross-reference
interchangeable
302-1360Interchangeable
interchangeable cross-reference
interchangeable
302-0058Interchangeable
interchangeable cross-reference
interchangeable
706611Interchangeable
interchangeable cross-reference
interchangeable
1707669-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 67322?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67322?
67322 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 67322?
There are 24 known substitutes for 67322: E396PC2, 30258, 302-1360 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 67322?
67322 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 67322

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026