PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6725873
6725873 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 14.943 INCHES MINIMUM AND 15.107 INCHES MAXIMUM IN, center_hole_diameter: 14.445 INCHES MINIMUM AND 14.505 INCHES MAXIMUM IN, elongation_percentage: 164 MAXIMUM, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-196-5358, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6725873
NSN: 5330-00-196-5358
FSC: 5330
CAGE: 73342 — ALLISON TRANSMISSION INC DBA ALLISON TRANSMISSION, INC (USA)
SPECIFICATIONS
peripheral_diameter14.943 INCHES MINIMUM AND 15.107 INCHES MAXIMUM IN
center_hole_diameter14.445 INCHES MINIMUM AND 14.505 INCHES MAXIMUM IN
elongation_percentage164 MAXIMUM
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5330-00-196-5358
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6725873 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 14.943 INCHES MINIMUM AND 15.107 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 14.445 INCHES MINIMUM AND 14.505 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 164 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
PERIPHERAL DIAMETER14.943 INCHES MINIMUM AND 15.107 INCHES MAXIMUM IN
CENTER HOLE DIAMETER14.445 INCHES MINIMUM AND 14.505 INCHES MAXIMUM IN
ELONGATION PERCENTAGE164 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
90218Interchangeable
interchangeable cross-reference
interchangeable
2200-771744REVAITEM105CInterchangeable
interchangeable cross-reference
interchangeable
P44Interchangeable
interchangeable cross-reference
interchangeable
T1-2409-1286522REVAPC13Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-60Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-60 TY2SEFST2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6725873?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6725873?
6725873 is a PACKING,PREFORMED.
What parts can replace 6725873?
There are 27 known substitutes for 6725873: 90218, 2200-771744REVAITEM105C, P44 and 24 more. Substitute compatibility should be verified for your specific system.
Is 6725873 still available?
6725873 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6725873

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026