PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6713539
6713539 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, lug_width: 0.500 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-597-0152, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6713539
NSN: 5340-00-597-0152
FSC: 5340
CAGE: 73342 — ALLISON TRANSMISSION INC DBA ALLISON TRANSMISSION, INC (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
lug_width0.500 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorRIGHT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.199 INCHES NOMINAL IN
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
material_document_and_classificationQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.922 INCHES NOMINAL IN
distance_from_outer_edge_of_lug_to_hole_center0.250 INCHES NOMINAL IN
NSN5340-00-597-0152
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6713539 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.830 INCHES NOMINAL IN
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.830 INCHES NOMINAL IN
DIAMETER0.199 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
STYLE DESIGNATORRIGHT HAND CLAMP & BRACKET
DISTANCE FROM LOOP CENTER TO TONGUE END0.922 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.672 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
2520003535052Interchangeable
interchangeable cross-reference
interchangeable
100135Interchangeable
interchangeable cross-reference
interchangeable
A027078218Interchangeable
interchangeable cross-reference
interchangeable
6703685Interchangeable
Same NIIN cross-reference
interchangeable
782-1-8Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6713539?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6713539?
6713539 is a CLAMP,LOOP.
What parts can replace 6713539?
There are 5 known substitutes for 6713539: 2520003535052, 100135, A027078218 and 2 more. Substitute compatibility should be verified for your specific system.
Is 6713539 still available?
6713539 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6713539

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026