PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 67118
67118 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ANODE,PLATING is a the manufacturer industrial component. Key specifications include length: 12.000 INCHES NOMINAL IN, material: GRAPHITE ANODE, outside_diameter: 2.000 INCHES NOMINAL IN, style_designator: ROD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-043-7978, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
67118
NSN: 5340-01-043-7978
FSC: 5340
CAGE: 16004 — DAVEY COMPRESSOR CO DIV OF KECO INDUSTRIES INC (USA)
SPECIFICATIONS
length12.000 INCHES NOMINAL IN
materialGRAPHITE ANODE
outside_diameter2.000 INCHES NOMINAL IN
style_designatorROD
NSN5340-01-043-7978
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 67118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
SPECIAL FEATURES0.312 IN. W 0.500 IN. LG SLOTS IN
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
OVERALL WIDTH0.625 INCHES NOMINAL IN
OVERALL LENGTH1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
116902Interchangeable
interchangeable cross-reference
interchangeable
7372528Interchangeable
interchangeable cross-reference
interchangeable
163-21Interchangeable
interchangeable cross-reference
interchangeable
67-118Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 67118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67118?
67118 is a ANODE,PLATING.
What parts can replace 67118?
There are 4 known substitutes for 67118: 116902, 7372528, 163-21 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 67118?
67118 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-043-7978. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 67118

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026