PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 67103
67103 ✓ Verified by PartsTable
Braun · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The Braun classic alarm clock has an easy to read dial with the iconic yellow second hand that has become synonymous with Braun’s award winning design. The clean simplistic look and ease of use makes this an outstanding Braun clock. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-696-0262, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
67103
NSN: 5315-00-696-0262
FSC: 5315
CAGE: 82278 — IONIA MFG CO (USA)
SPECIFICATIONS
height0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
diameter0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
materialSTEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1120 OR STEEL COMP 1022 OR STEEL COMP 1113 OR STEEL COMP 1020 OVERALL
jaw_width0.984 INCHES NOMINAL IN
head_styleFLAT
jaw_length0.843 INCHES NOMINAL IN
jaw_thickness0.390 INCHES NOMINAL IN
overall_length11.125 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
overall_diameter0.620 INCHES MAXIMUM IN
special_featuresMINIMUM VOLTAGE; JUNCTION PATTERN ARRANGEMENT: PNP
style_designatorSTRAIGHT
NSN5315-00-696-0262
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 67103 · Braun ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 0.891 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN
•
HEIGHT: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
PIN HEAD DIAMETER: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST HOLE DIAMETER: 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1120 OR STEEL COMP 1022 OR STEEL COMP 1113 OR STEEL COMP 1020 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
UNDER HEAD LENGTH0.891 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN
HEIGHT0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
PIN HEAD DIAMETER0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST HOLE DIAMETER0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1120 OR STEEL COMP 1022 OR STEEL COMP 1113 OR STEEL COMP 1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
HEAD STYLEFLAT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
14851Interchangeable
interchangeable cross-reference
interchangeable
P148-51Interchangeable
interchangeable cross-reference
interchangeable
67103Interchangeable
interchangeable cross-reference
interchangeable
1853-0396Interchangeable
interchangeable cross-reference
interchangeable
E0101-14Interchangeable
interchangeable cross-reference
interchangeable
1LLPHF/CFInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 67103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67103?
67103 is a TRANSISTOR manufactured by Braun.
What parts can replace 67103?
There are 14 known substitutes for 67103: 14851, P148-51, 67103 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 67103?
67103 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-696-0262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 67103

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026