PartsTable
Technical Data Sheet
Download PDF

671-162-9002 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

671-162-9002: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.188 INCHES NOMINAL IN, diameter: 0.250 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6061 OVERALL, thread_class: 2B LEFT INTERNAL (INCLUDES THRU THREAD), hole_diameter: 0.148 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN, thread_length: 0.188 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-389-0120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
671-162-9002
NSN: 5340-01-389-0120
FSC: 5340 — Hardware, Commercial
CAGE: 64547 — HONEYWELL INTERNATIONAL, INC DIV AEROSPACE-TUCSON (USA)
SPECIFICATIONS
length0.188 INCHES NOMINAL IN
diameter0.250 INCHES NOMINAL IN
materialALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6061 OVERALL
thread_class2B LEFT INTERNAL (INCLUDES THRU THREAD)
hole_diameter0.148 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
thread_length0.188 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
style_designatorPROJECTION ONE END LEFT INTERNAL THREAD
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
surface_treatmentANODIZE OVERALL
nominal_thread_size0.125 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
cross-sectional_shapeROUND
right_projection_length0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
NSN5340-01-389-0120
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 671-162-9002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.188 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.188 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: PROJECTION ONE END LEFT INTERNAL THREAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/3 T3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/8 T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
•
NOMINAL THREAD SIZE: 0.125 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
TECHNICAL CHARACTERISTICS
LENGTH0.188 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.188 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
STYLE DESIGNATORPROJECTION ONE END LEFT INTERNAL THREAD
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/3 T3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/8 T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
DIAMETER0.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
NOMINAL THREAD SIZE0.125 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
CROSS-SECTIONAL SHAPEROUND
SURFACE TREATMENTANODIZE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 671-162-9002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 671-162-9002?
671-162-9002 is a STANDOFF,THREADED,SPACING.
What is the NSN for 671-162-9002?
671-162-9002 is cataloged in the U.S. Government catalog under NSN 5340-01-389-0120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 671-162-9002

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.