PartsTable
Technical Data Sheet
Download PDF

671-003-9010 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

671-003-9010: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: SLEEVE, nut_length: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN, thread_class: 2B, boss_diameter: 0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM OVERALL IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-041-9651, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
671-003-9010
NSN: 5310-01-041-9651
FSC: 5310 — Nuts and Washers
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleSLEEVE
nut_length0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
thread_class2B
boss_diameter0.185 INCHES MINIMUM AND 0.189 INCHES MAXIMUM OVERALL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
boss_thickness0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM OVERALL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
nominal_thread_size0.112 INCHES IN
counterbore_diameter0.147 INCHES MINIMUM AND 0.155 INCHES MAXIMUM BOSS IN
cross-sectional_shapeROUND BOSS
NSN5310-01-041-9651
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 671-003-9010 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NUT WIDTH ACROSS FLATS: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
NUT COUNTERBORE DEPTH: 0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM BOSS IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
COUNTERBORE DIAMETER: 0.147 INCHES MINIMUM AND 0.155 INCHES MAXIMUM BOSS IN
•
BOSS THICKNESS: 0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM OVERALL IN
TECHNICAL CHARACTERISTICS
NUT LENGTH0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NUT WIDTH ACROSS FLATS0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
NUT COUNTERBORE DEPTH0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM BOSS IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
COUNTERBORE DIAMETER0.147 INCHES MINIMUM AND 0.155 INCHES MAXIMUM BOSS IN
BOSS THICKNESS0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM OVERALL IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
CROSS-SECTIONAL SHAPEROUND BOSS
SUBSTITUTES & CROSS-REFERENCES 2
2103832-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
3297-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 671-003-9010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 671-003-9010?
671-003-9010 is a NUT,SLEEVE.
What parts can replace 671-003-9010?
There are 2 known substitutes for 671-003-9010: 2103832-1, 3297-10. Substitute compatibility should be verified for your specific system.
What is the NSN for 671-003-9010?
671-003-9010 is cataloged in the U.S. Government catalog under NSN 5310-01-041-9651. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 671-003-9010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.