PartsTable
Technical Data Sheet
Download PDF

670920 — PIN,SHOULDER,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

670920: PIN,SHOULDER,HEADED.

The PIN,SHOULDER,HEADED is a the manufacturer industrial component. Key specifications include height: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN, material: STEEL COMP 630 OVERALL, head_style: FLAT, first_end_style: CHAMFERED, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL, pin_head_diameter: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-161-0527, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
670920
NSN: 5315-00-161-0527
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)
SPECIFICATIONS
height0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
materialSTEEL COMP 630 OVERALL
head_styleFLAT
first_end_styleCHAMFERED
hardness_rating35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
pin_head_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
first_end_taper_angle15.0 DEGREES NOMINAL
first_end_taper_length0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-161-0527
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 670920 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
PIN HEAD DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
HEAD STYLE: FLAT
•
HEIGHT: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
PIN HEAD DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE15.0 DEGREES NOMINAL
HEAD STYLEFLAT
HEIGHT0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
MATERIALSTEEL COMP 630 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 670920?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 670920?
670920 is a PIN,SHOULDER,HEADED.
What is the NSN for 670920?
670920 is cataloged in the U.S. Government catalog under NSN 5315-00-161-0527. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 670920