PartsTable
Technical Data Sheet
Download PDF

6708202 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6708202: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM BONDING STRIP, lug_width: 0.500 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-193-2622, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6708202
NSN: 5340-00-193-2622
FSC: 5340 — Hardware, Commercial
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM BONDING STRIP
lug_width0.500 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorRIGHT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.257 INCHES NOMINAL IN
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter1.000 INCHES NOMINAL IN
fastening_device_typeLUG
material_document_and_classificationQQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.219 INCHES NOMINAL IN
NSN5340-00-193-2622
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6708202 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.257 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 1.375 INCHES NOMINAL IN
•
FASTENING DEVICE TYPE: LUG
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.199 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.257 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE1.375 INCHES NOMINAL IN
FASTENING DEVICE TYPELUG
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.250 INCHES NOMINAL IN
STYLE DESIGNATORRIGHT HAND CLAMP & BRACKET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.199 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
LUG WIDTH0.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
84-3-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
784-3-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6708202?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6708202?
6708202 is a CLAMP,LOOP.
What parts can replace 6708202?
There are 2 known substitutes for 6708202: 84-3-16, 784-3-16. Substitute compatibility should be verified for your specific system.
What is the NSN for 6708202?
6708202 is cataloged in the U.S. Government catalog under NSN 5340-00-193-2622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6708202

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.