PartsTable
Technical Data Sheet
Download PDF

6705924P5 — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6705924P5: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.312 INCHES NOMINAL IN, material: STEEL, outside_diameter: 1.314 INCHES MINIMUM AND 1.315 INCHES MAXIMUM IN, style_designator: CUP, surface_treatment: OXIDE, material_thickness: 0.047 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-584-3726, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6705924P5
NSN: 5340-00-584-3726
FSC: 5340 — Hardware, Commercial
CAGE: 73342 — ALLISON TRANSMISSION INC DBA ALLISON TRANSMISSION, INC (USA)
SPECIFICATIONS
height0.312 INCHES NOMINAL IN
materialSTEEL
outside_diameter1.314 INCHES MINIMUM AND 1.315 INCHES MAXIMUM IN
style_designatorCUP
surface_treatmentOXIDE
material_thickness0.047 INCHES NOMINAL IN
material_document_and_classificationAMS 5022 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5040 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-584-3726
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6705924P5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.314 INCHES MINIMUM AND 1.315 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CUP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5022 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5040 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.047 INCHES NOMINAL IN
•
HEIGHT: 0.312 INCHES NOMINAL IN
•
SURFACE TREATMENT: OXIDE
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER1.314 INCHES MINIMUM AND 1.315 INCHES MAXIMUM IN
STYLE DESIGNATORCUP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5022 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5040 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL THICKNESS0.047 INCHES NOMINAL IN
HEIGHT0.312 INCHES NOMINAL IN
SURFACE TREATMENTOXIDE
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
6705924P005Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6705924P5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6705924P5?
6705924P5 is a PLUG,EXPANSION.
What parts can replace 6705924P5?
There is 1 known substitute for 6705924P5: 6705924P005. Substitute compatibility should be verified for your specific system.
What is the NSN for 6705924P5?
6705924P5 is cataloged in the U.S. Government catalog under NSN 5340-00-584-3726. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6705924P5