PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 67053-4
67053-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 10.500 INCHES NOMINAL IN, aperture_width: 7.750 INCHES NOMINAL IN, overall_length: 11.000 INCHES NOMINAL IN, aperture_length: 10.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-305-9507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
67053-4
NSN: 5330-01-305-9507
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width10.500 INCHES NOMINAL IN
aperture_width7.750 INCHES NOMINAL IN
overall_length11.000 INCHES NOMINAL IN
aperture_length10.000 INCHES NOMINAL IN
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
bolt_hole_quantity4
inside_corner_radius0.125 INCHES NOMINAL IN
outside_corner_radius0.250 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-305-9507
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 67053-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
APERTURE LENGTH: 10.000 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.375 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH0.500 INCHES NOMINAL IN
APERTURE LENGTH10.000 INCHES NOMINAL IN
OVERALL LENGTH11.000 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
OVERALL WIDTH10.500 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
Y2566200-2Interchangeable
interchangeable cross-reference
interchangeable
7102706P001Interchangeable
interchangeable cross-reference
interchangeable
AA332-06Interchangeable
interchangeable cross-reference
interchangeable
7264587Interchangeable
interchangeable cross-reference
interchangeable
67053Interchangeable
interchangeable cross-reference
interchangeable
68065 PIECE 7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 67053-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67053-4?
67053-4 is a GASKET.
What parts can replace 67053-4?
There are 8 known substitutes for 67053-4: Y2566200-2, 7102706P001, AA332-06 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 67053-4?
67053-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-305-9507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 67053-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026