PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6700-5PC310
6700-5PC310 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.562 INCHES NOMINAL IN, housing_bore_diameter: 4.125 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-1418, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6700-5PC310
NSN: 5330-00-179-1418
FSC: 5330
CAGE: 70885 — DAVIES ASSOCIATES (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.562 INCHES NOMINAL IN
housing_bore_diameter4.125 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-179-1418
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6700-5PC310 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 4.125 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.562 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER4.125 INCHES NOMINAL IN
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.562 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
81331Interchangeable
interchangeable cross-reference
interchangeable
4283-28Interchangeable
interchangeable cross-reference
interchangeable
1881809Interchangeable
interchangeable cross-reference
interchangeable
92518Interchangeable
interchangeable cross-reference
interchangeable
TS-1587/GPNInterchangeable
interchangeable cross-reference
interchangeable
98891-A DETAILInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6700-5PC310?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6700-5PC310?
6700-5PC310 is a SEAL,PLAIN ENCASED.
What parts can replace 6700-5PC310?
There are 16 known substitutes for 6700-5PC310: 81331, 4283-28, 1881809 and 13 more. Substitute compatibility should be verified for your specific system.
Is 6700-5PC310 still available?
6700-5PC310 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6700-5PC310

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026