PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6700-289100
6700-289100 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 1.000 INCHES NOMINAL IN, knuckle_type: FRICTION, performance_type: LIGHT DUTY, pin_removability: REMOVABLE, material_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-6694, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6700-289100
NSN: 5340-00-200-6694
FSC: 5340
CAGE: 80049 — DEPARTMENT OF THE AIR FORCE (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width1.000 INCHES NOMINAL IN
knuckle_typeFRICTION
knuckle_quantity3
performance_typeLIGHT DUTY
pin_removabilityREMOVABLE
material_thickness0.031 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL MORTISE
pin_center_to_body_edge_distance0.500 INCHES NOMINAL IN
NSN5340-00-200-6694
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6700-289100 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY WIDTH: 1.000 INCHES NOMINAL IN
•
PIN REMOVABILITY: REMOVABLE
•
KNUCKLE TYPE: FRICTION
•
MATERIAL: UNABLE TO DECODE
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE QUANTITY: 3
•
HINGE MOUNTING TYPE: FULL MORTISE
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BODY WIDTH1.000 INCHES NOMINAL IN
PIN REMOVABILITYREMOVABLE
KNUCKLE TYPEFRICTION
MATERIALUNABLE TO DECODE
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE QUANTITY3
HINGE MOUNTING TYPEFULL MORTISE
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
PERFORMANCE TYPELIGHT DUTY
PIN CENTER TO BODY EDGE DISTANCE0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1838Upgraded Successor
successor cross-reference
successor
840Upgraded Successor
successor cross-reference
successor
ANSI A156.1 A8133Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6700-289100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6700-289100?
6700-289100 is a HINGE,BUTT.
What parts can replace 6700-289100?
There are 3 known substitutes for 6700-289100: 1838, 840, ANSI A156.1 A8133. Substitute compatibility should be verified for your specific system.
What is the NSN for 6700-289100?
6700-289100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-6694. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6700-289100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026