PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6700-181195
6700-181195 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,FRICTION is a the manufacturer industrial component. Key specifications include length: 0.500 INCHES NOMINAL IN, diameter: 0.375 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, style_designator: PRESSURE, nondefinitive_spec/std_data: 1071 TYPE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-2809, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6700-181195
NSN: 5340-00-598-2809
FSC: 5340
CAGE: 80049 — DEPARTMENT OF THE AIR FORCE (USA)
SPECIFICATIONS
length0.500 INCHES NOMINAL IN
diameter0.375 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
style_designatorPRESSURE
nondefinitive_spec/std_data1071 TYPE
NSN5340-00-598-2809
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6700-181195 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
STYLE DESIGNATOR: PRESSURE
•
DIAMETER: 0.375 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1071 TYPE
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.500 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
STYLE DESIGNATORPRESSURE
DIAMETER0.375 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1071 TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
30CUpgraded Successor
successor cross-reference
successor
13211E6947Interchangeable
interchangeable cross-reference
interchangeable
305P315Interchangeable
interchangeable cross-reference
interchangeable
500MA200PRVInterchangeable
interchangeable cross-reference
interchangeable
UG30CUInterchangeable
interchangeable cross-reference
interchangeable
82-201Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6700-181195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6700-181195?
6700-181195 is a CATCH,FRICTION.
What parts can replace 6700-181195?
There are 13 known substitutes for 6700-181195: 30C, 13211E6947, 305P315 and 10 more. Substitute compatibility should be verified for your specific system.
Is 6700-181195 still available?
6700-181195 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6700-181195

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026