PartsTable
Technical Data Sheet
Download PDF

67-320 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
Legrand · MRO · MRO_GENERAL
PRODUCT OVERVIEW

67-320: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.580 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.656 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 67-320
NSN: 3110-00-100-0610
NIINs: 001000610, 006511618
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.580 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.656 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter1.453 INCHES NOMINAL IN
overall_width1.5000 INCHES NOMINAL IN
pilot_diameter1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM IN
shaft_diameter0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
undercut_width0.0730 INCHES NOMINAL IN
NSN3110-00-100-0610
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 67-320 · Legrand ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 8.0000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH1.5000 INCHES NOMINAL IN
OUTSIDE DIAMETER8.0000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
706951Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 67-320?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 67-320?
67-320 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 67-320?
There is 1 known substitute for 67-320: 706951. Substitute compatibility should be verified for your specific system.
What is the NSN for 67-320?
67-320 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 67-320

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.