PartsTable
Technical Data Sheet
Download PDF

66C64239 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

66C64239: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include angle: 45.0 DEGREES NOMINAL, material: STEEL COMP 1117 OVERALL, fork_depth: 2.500 INCHES NOMINAL IN, angle_height: 0.500 INCHES NOMINAL IN, shank_length: 7.500 INCHES NOMINAL IN, thread_class: 1A ROD CONNECTION A. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-226-1234, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
66C64239
NSN: 5340-00-226-1234
FSC: 5340 — Hardware, Commercial
CAGE: 04984 — CELTECH CORPORATION DIV USE CAGE 65552 FOR ALL ORDERS (USA)
SPECIFICATIONS
angle45.0 DEGREES NOMINAL
materialSTEEL COMP 1117 OVERALL
fork_depth2.500 INCHES NOMINAL IN
angle_height0.500 INCHES NOMINAL IN
shank_length7.500 INCHES NOMINAL IN
thread_class1A ROD CONNECTION A
hole_diameter1.500 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
overall_width2.500 INCHES NOMINAL IN
thread_length7.250 INCHES NOMINAL ROD CONNECTION IN
overall_height2.500 INCHES NOMINAL IN
shank_diameter2.000 INCHES NOMINAL IN
fork_span_width0.750 INCHES NOMINAL IN
NSN5340-00-226-1234
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 66C64239 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 2.000 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.750 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.875 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 7.250 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 7.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER2.000 INCHES NOMINAL IN
OVERALL HEIGHT2.500 INCHES NOMINAL IN
FORK SPAN WIDTH0.750 INCHES NOMINAL IN
FORK ARM THICKNESS0.875 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH7.250 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH7.500 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH2.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
002850Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 66C64239?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 66C64239?
66C64239 is a CLEVIS,ROD END.
What parts can replace 66C64239?
There is 1 known substitute for 66C64239: 002850. Substitute compatibility should be verified for your specific system.
What is the NSN for 66C64239?
66C64239 is cataloged in the U.S. Government catalog under NSN 5340-00-226-1234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 66C64239