PartsTable
Technical Data Sheet
Download PDF

66B42938 — LATCH,MORTISE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

66B42938: LATCH,MORTISE.

The LATCH,MORTISE is a the manufacturer industrial component. Key specifications include width: 0.625 INCHES NOMINAL IN, height: 2.312 INCHES NOMINAL IN, material: UNABLE TO DECODE, face_shape: FLAT, action_type: SPRING, special_features: DISTANCE BETWEEN MTG HOLE CENTERS:1.938 IN. IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-814-1161, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
66B42938
NSN: 5340-00-814-1161
FSC: 5340 — Hardware, Commercial
CAGE: 98749 — SACRAMENTO AIR LOGISTICS CENTER SM-ALC/LIIL (USA)
SPECIFICATIONS
width0.625 INCHES NOMINAL IN
height2.312 INCHES NOMINAL IN
materialUNABLE TO DECODE
face_shapeFLAT
action_typeSPRING
special_featuresDISTANCE BETWEEN MTG HOLE CENTERS:1.938 IN. IN
surface_treatmentUNABLE TO DECODE
end_item_identificationNSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK)
operating_mechanism_locationONE SIDE
NSN5340-00-814-1161
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 66B42938 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FACE SHAPE: FLAT
•
OPERATING MECHANISM LOCATION: ONE SIDE
•
ACTION TYPE: SPRING
•
HEIGHT: 2.312 INCHES NOMINAL IN
•
SURFACE TREATMENT: UNABLE TO DECODE
•
WIDTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FACE SHAPEFLAT
OPERATING MECHANISM LOCATIONONE SIDE
ACTION TYPESPRING
HEIGHT2.312 INCHES NOMINAL IN
SPECIAL FEATURESDISTANCE BETWEEN MTG HOLE CENTERS:1.938 IN. IN
SURFACE TREATMENTUNABLE TO DECODE
WIDTH0.625 INCHES NOMINAL IN
END ITEM IDENTIFICATIONNSN 4210-01-486-1035 TFFT (TACTICAL FIRE FIGHTING TRUCK)
MATERIALUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES 2
680-1-05Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
82-0042Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 66B42938?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 66B42938?
66B42938 is a LATCH,MORTISE.
What parts can replace 66B42938?
There are 2 known substitutes for 66B42938: 680-1-05, 82-0042. Substitute compatibility should be verified for your specific system.
What is the NSN for 66B42938?
66B42938 is cataloged in the U.S. Government catalog under NSN 5340-00-814-1161. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 66B42938