6692947-1 — PIN,SHOULDER,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

6692947-1: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OVERALL, first_end_style: CHAMFERED, second_end_style: ROUND, special_features: TWO HOLES LOCATED ON SECOND STEP 0.510 IN. MIN 0.520 IN.

MAX PLUS A 2.670 IN. LONG SLOT IN, style_designator: SHOULDER, first_step_length: 4.847 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-388-8496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

6692947-1

NSN: 5315-01-388-8496
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	STEEL COMP 4140 OVERALL
first_end_style	CHAMFERED
second_end_style	ROUND
special_features	TWO HOLES LOCATED ON SECOND STEP 0.510 IN. MIN 0.520 IN. MAX PLUS A 2.670 IN. LONG SLOT IN
style_designator	SHOULDER
first_step_length	4.847 INCHES NOMINAL IN
surface_treatment	PHOSPHATE MANGANESE OVERALL
third_step_length	0.723 INCHES NOMINAL IN
first_end_location	SMALL END
second_step_length	4.800 INCHES NOMINAL IN
first_hole_diameter	0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
first_step_diameter	1.248 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
NSN	5315-01-388-8496

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN

•

FIRST STEP DIAMETER: 1.248 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN

•

FIRST END LOCATION: SMALL END

•

THIRD STEP DIAMETER: 0.500 INCHES NOMINAL IN

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

FIRST END STYLE: CHAMFERED

•

FIRST HOLE DIAMETER: 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN

•

SECOND STEP LENGTH: 4.800 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

FIRST END TAPER LENGTH	0.060 INCHES NOMINAL IN
FIRST STEP DIAMETER	1.248 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
FIRST END LOCATION	SMALL END
THIRD STEP DIAMETER	0.500 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLE	ONE END DRILLED
FIRST END STYLE	CHAMFERED
FIRST HOLE DIAMETER	0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
SECOND STEP LENGTH	4.800 INCHES NOMINAL IN
STYLE DESIGNATOR	SHOULDER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626, COND F MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

6692947Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 6692947-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 6692947-1?

6692947-1 is a PIN,SHOULDER,HEADLESS.

What parts can replace 6692947-1?

There is 1 known substitute for 6692947-1: 6692947. Substitute compatibility should be verified for your specific system.

What is the NSN for 6692947-1?

6692947-1 is cataloged in the U.S. Government catalog under NSN 5315-01-388-8496. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

6692947-1 — PIN,SHOULDER,HEADLESS

Request a Quote — 6692947-1