PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 667275
667275 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL OVERALL, grip_length: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, head_height: 0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, heat_treatment: AS FABRICATED OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-143-7585, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
667275
NSN: 3110-00-143-7585
FSC: 3110
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
grip_length0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
head_height0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
shank_stylePIN-RIVET, STRAIGHT, THREADED
thread_class3A A
heat_treatmentAS FABRICATED OVERALL
shank_diameter0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
fastener_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
head_major_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
NSN3110-00-143-7585
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 667275 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 5.0000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
OUTSIDE DIAMETER5.0000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL WIDTH0.8750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
S16073Interchangeable
interchangeable cross-reference
interchangeable
SRB305SInterchangeable
interchangeable cross-reference
interchangeable
1B4115Interchangeable
interchangeable cross-reference
interchangeable
30293Interchangeable
interchangeable cross-reference
interchangeable
N9108APC13Interchangeable
interchangeable cross-reference
interchangeable
27602Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 667275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 667275?
667275 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace 667275?
There are 27 known substitutes for 667275: S16073, SRB305S, 1B4115 and 24 more. Substitute compatibility should be verified for your specific system.
Is 667275 still available?
667275 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 667275

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026