PartsTable
Technical Data Sheet
PartsTable / MRO / 667232
667232 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, overall_width: 0.6875 INCHES NOMINAL IN, outside_diameter: 1.9380 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.0620 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0641, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 667232
NSN: 3110-00-100-0641
FSC: 3110
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.6875 INCHES NOMINAL IN
outside_diameter1.9380 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
backface_corner_radius0.0620 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-0641
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 667232 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.9380 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.6875 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
OUTSIDE DIAMETER1.9380 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
209984Interchangeable
interchangeable cross-reference
interchangeable
177004-14Interchangeable
interchangeable cross-reference
interchangeable
23005Interchangeable
interchangeable cross-reference
interchangeable
MS51957-06Interchangeable
interchangeable cross-reference
interchangeable
702002-181Interchangeable
interchangeable cross-reference
interchangeable
SWX12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 667232?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 667232?
667232 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 667232?
There are 30 known substitutes for 667232: 209984, 177004-14, 23005 and 27 more. Substitute compatibility should be verified for your specific system.
Is 667232 still available?
667232 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 667232

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026