PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 667116
667116 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include angle: 67.5 DEGREES, height: 0.891 INCHES NOMINAL IN, material: COPPER ALLOY AND STEEL OVERALL, shank_length: 0.266 INCHES NOMINAL IN, special_features: NO CHECK VALVE, style_designator: ANGLE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-203-8035, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
667116
NSN: 4730-00-203-8035
FSC: 4730
CAGE: 81782 — ALMON JOHNSON LTD (USA)
SPECIFICATIONS
angle67.5 DEGREES
height0.891 INCHES NOMINAL IN
materialCOPPER ALLOY AND STEEL OVERALL
shank_length0.266 INCHES NOMINAL IN
special_featuresNO CHECK VALVE
style_designatorANGLE
width_across_flats0.438 INCHES NOMINAL IN
nominal_thread_size0.125 INCHES IN
pressure_relief_methodSLOT SIDE
thread_quantity_per_inch27
assembly_clearance_radius0.500 INCHES NOMINAL IN
screw_thread_series_designatorPTF-SPL SHORT
NSN4730-00-203-8035
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 667116 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK LENGTH: 0.266 INCHES NOMINAL IN
•
SCREW THREAD SERIES DESIGNATOR: PTF-SPL SHORT
•
ASSEMBLY CLEARANCE RADIUS: 0.500 INCHES NOMINAL IN
•
HEIGHT: 0.891 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY AND STEEL OVERALL
•
NOMINAL THREAD SIZE: 0.125 INCHES IN
•
THREAD QUANTITY PER INCH: 27
TECHNICAL CHARACTERISTICS (FLIS)
SHANK LENGTH0.266 INCHES NOMINAL IN
SCREW THREAD SERIES DESIGNATORPTF-SPL SHORT
SPECIAL FEATURESNO CHECK VALVE
ASSEMBLY CLEARANCE RADIUS0.500 INCHES NOMINAL IN
HEIGHT0.891 INCHES NOMINAL IN
MATERIALCOPPER ALLOY AND STEEL OVERALL
NOMINAL THREAD SIZE0.125 INCHES IN
THREAD QUANTITY PER INCH27
PRESSURE RELIEF METHODSLOT SIDE
STYLE DESIGNATORANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
1925Interchangeable
IBM 300GB 10k RPM SAS SFF-2 Disk Drive (AIX/Linux)
interchangeable
480351-7Interchangeable
interchangeable cross-reference
interchangeable
21854Interchangeable
interchangeable cross-reference
interchangeable
1006252-4Interchangeable
interchangeable cross-reference
interchangeable
E/N33Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-3747Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 667116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 667116?
667116 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 667116?
There are 17 known substitutes for 667116: 1925, 480351-7, 21854 and 14 more. Substitute compatibility should be verified for your specific system.
Is 667116 still available?
667116 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 667116

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026