PartsTable
Technical Data Sheet
Download PDF

667-154-13 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

667-154-13: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, design_type: FRICTION, overall_diameter: 1.680 INCHES NOMINAL IN, special_features: 7.5 IN LONG TIE STRAP IN, inside_diameter_length: 1.620 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-144-2891, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
667-154-13
NSN: 5340-01-144-2891
FSC: 5340 — Hardware, Commercial
CAGE: 6D470 — GLENAIR INC ANDERSON BRAIDING AND EXTRUSION DIV (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
design_typeFRICTION
overall_diameter1.680 INCHES NOMINAL IN
special_features7.5 IN LONG TIE STRAP IN
inside_diameter_length1.620 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
opening_inside_diameter_for_which_designed1.220 INCHES NOMINAL IN
NSN5340-01-144-2891
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 667-154-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 1.680 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 1.220 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
•
INSIDE DIAMETER LENGTH: 1.620 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER1.680 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED1.220 INCHES NOMINAL IN
SPECIAL FEATURES7.5 IN LONG TIE STRAP IN
MATERIALRUBBER CHLOROPRENE CLASS CR
INSIDE DIAMETER LENGTH1.620 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 1
13012174-3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 667-154-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 667-154-13?
667-154-13 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 667-154-13?
There is 1 known substitute for 667-154-13: 13012174-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 667-154-13?
667-154-13 is cataloged in the U.S. Government catalog under NSN 5340-01-144-2891. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 667-154-13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.