PartsTable
Technical Data Sheet
Download PDF

66667-0400 — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

66667-0400: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, thread_class: 2B, inside_length: 4.380 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.164 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-249-4384, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
66667-0400
NSN: 5340-01-249-4384
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
thread_class2B
inside_length4.380 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
surface_treatmentANODIZE OVERALL
nominal_thread_size0.164 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity2
material_document_and_classificationQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 3,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.970 INCHES MINIMUM AND 5.050 INCHES MAXIMUM IN
NSN5340-01-249-4384
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 66667-0400 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 3,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
INSIDE LENGTH: 4.380 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.970 INCHES MINIMUM AND 5.050 INCHES MAXIMUM IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
SURFACE TREATMENT: ANODIZE OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 3,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
INSIDE LENGTH4.380 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.970 INCHES MINIMUM AND 5.050 INCHES MAXIMUM IN
MOUNTING METHODTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE0.164 INCHES IN
SURFACE TREATMENTANODIZE OVERALL
THREAD CLASS2B
MATERIALALUMINUM ALLOY 6061 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
8001093-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
VPC-818Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 66667-0400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 66667-0400?
66667-0400 is a HANDLE,BAIL.
What parts can replace 66667-0400?
There are 2 known substitutes for 66667-0400: 8001093-2, VPC-818. Substitute compatibility should be verified for your specific system.
What is the NSN for 66667-0400?
66667-0400 is cataloged in the U.S. Government catalog under NSN 5340-01-249-4384. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 66667-0400

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.