66639 — STRUCTURAL SECTION,SPECIAL SHAPE

✓ Government record, cited

InLine · COMPONENT

PRODUCT OVERVIEW

66639: STRUCTURAL SECTION,SPECIAL SHAPE.

The PCI card extends your PC by four external serial ports. You can connect several devices like scanners, modems, mice etc. to this card.

- 2 x 9pin serial ports + 2x pin connectors, with slot cover to 9pin Sub D plug - compatible with 16C550 UART - FIFO: 16 byte - data transfer rate up to 1 Mbps - Plug & Play - Chipset: NM9845CV - automatic setup of IRQ and I/O - supports PCI IQR Sharing - 32-Bit PCI standard 2.1 - for Windows 98SE/ME/2000/NT4.0/XP, Linux, DOS This part is cataloged in the U.S. Government catalog under NSN 9540-00-273-6388, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS

66639

NSN: 9540-00-273-6388
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 01634 — ALUMINUM CO OF AMERICA (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7075
heat_treatment	T-6 SOLUTION HEAT TREATED
fabrication_method	EXTRUDED
weight_per_unit_measure	0.175 POUNDS PER LINEAR FOOT LBS
nondefinitive_spec/std_data	T6 TEMPER
material_document_and_classification	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristics	AS DIFFERENTIATED BY MATERIAL,TEMPER AND LENGTH REQUIREMENTS
NSN	9540-00-273-6388

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

HEAT TREATMENT: T-6 SOLUTION HEAT TREATED

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

•

WEIGHT PER UNIT MEASURE: 0.175 POUNDS PER LINEAR FOOT LBS

•

NONDEFINITIVE SPEC/STD DATA: T6 TEMPER

•

MATERIAL: ALUMINUM ALLOY 7075

•

FABRICATION METHOD: EXTRUDED

•

REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY MATERIAL,TEMPER AND LENGTH REQUIREMENTS

TECHNICAL CHARACTERISTICS

LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
WEIGHT PER UNIT MEASURE	0.175 POUNDS PER LINEAR FOOT LBS
NONDEFINITIVE SPEC/STD DATA	T6 TEMPER
MATERIAL	ALUMINUM ALLOY 7075
FABRICATION METHOD	EXTRUDED
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY MATERIAL,TEMPER AND LENGTH REQUIREMENTS

SUBSTITUTES & CROSS-REFERENCES 5

26615Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

PA14158Reference document

Same NSN cross-reference

Reference document — Secondary reference

LS5006Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

QQA200-11Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)

Ready to buy 66639?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 66639?

66639 is a STRUCTURAL SECTION,SPECIAL SHAPE manufactured by InLine.

What parts can replace 66639?

There are 5 known substitutes for 66639: 26615, AMS-QQ-A-200/11, PA14158 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 66639?

66639 is cataloged in the U.S. Government catalog under NSN 9540-00-273-6388. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

66639 — STRUCTURAL SECTION,SPECIAL SHAPE

Request a Quote — 66639