PartsTable
Technical Data Sheet
Download PDF

666137-192 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

666137-192: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CLINCH, nut_height: 0.092 INCHES NOMINAL IN, nut_diameter: 0.250 INCHES NOMINAL IN, pilot_length: 0.030 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-596-6430, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
666137-192
NSN: 5310-00-596-6430
FSC: 5310 — Nuts and Washers
CAGE: 12436 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DIV BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCLINCH
nut_height0.092 INCHES NOMINAL IN
nut_diameter0.250 INCHES NOMINAL IN
pilot_length0.030 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.164 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.086 INCHES IN
thread_quantity_per_inch56
NSN5310-00-596-6430
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 666137-192 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.086 INCHES IN
•
NUT DIAMETER: 0.250 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.164 INCHES NOMINAL IN
•
PILOT LENGTH: 0.030 INCHES NOMINAL IN
•
NUT HEIGHT: 0.092 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.086 INCHES IN
NUT DIAMETER0.250 INCHES NOMINAL IN
PILOT DIAMETER0.164 INCHES NOMINAL IN
PILOT LENGTH0.030 INCHES NOMINAL IN
NUT HEIGHT0.092 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
NUT STYLECLINCH
SUBSTITUTES & CROSS-REFERENCES 3
S256-0CReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
334-0507-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S256-0Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 666137-192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 666137-192?
666137-192 is a NUT,PLAIN,CLINCH.
What parts can replace 666137-192?
There are 3 known substitutes for 666137-192: S256-0C, 334-0507-000, S256-0. Substitute compatibility should be verified for your specific system.
What is the NSN for 666137-192?
666137-192 is cataloged in the U.S. Government catalog under NSN 5310-00-596-6430. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 666137-192

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.