PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6654A

6654A — Technical Data Sheet

✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include seat_angle: 30.0 DEGREES FIRST END, input_phase: SINGLE SINGLE OPERATING POWER RQMT, overall_width: 16.750 INCHES NOMINAL IN, exterior_color: CREAM, overall_height: 5.220 INCHES NOMINAL IN, overall_length: 19.600 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-430-3264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6654A
NSN: 4720-00-430-3264
FSC: 4720
CAGE: 95879 — STEWART-WARNER ALEMITE CORP (USA)
SPECIFICATIONS
seat_angle30.0 DEGREES FIRST END
input_phaseSINGLE SINGLE OPERATING POWER RQMT
overall_width16.750 INCHES NOMINAL IN
exterior_colorCREAM
overall_height5.220 INCHES NOMINAL IN
overall_length19.600 INCHES NOMINAL IN
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter0.188 INCHES NOMINAL IN
connection_stylePLAIN FIRST END
outside_diameter0.266 INCHES NOMINAL IN
special_featuresRFI SUPPRESSION, REMOTE SENSING AND DIGITAL READOUT
thread_directionRIGHT-HAND FIRST END
NSN4720-00-430-3264
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 6654A · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE SURFACE CONDITION: SMOOTH
•
MEASURING METHOD AND LENGTH: 19.250 INCHES NOMINAL OVERALL IN
•
SEAT ANGLE: 30.0 DEGREES FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
MEDIA FOR WHICH DESIGNED: GREASE SINGLE RESPONSE
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
INSIDE DIAMETER: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE SURFACE CONDITIONSMOOTH
MEASURING METHOD AND LENGTH19.250 INCHES NOMINAL OVERALL IN
SEAT ANGLE30.0 DEGREES FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
MEDIA FOR WHICH DESIGNEDGREASE SINGLE RESPONSE
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
SPECIAL FEATURESW/QUICK DISCONNECT GREASE FITTINGS
INSIDE DIAMETER0.188 INCHES NOMINAL IN
EXTERIOR COLORCREAM
CONNECTION TYPETHREADED EXTERNAL PIPE FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
M10661Interchangeable
interchangeable cross-reference
interchangeable
M1066Interchangeable
interchangeable cross-reference
interchangeable
2006 4Interchangeable
interchangeable cross-reference
interchangeable
41-11051Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
2781Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6654A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6654A?
6654A is a BEARING,BALL,ANNULAR.
What parts can replace 6654A?
There are 16 known substitutes for 6654A: M10661, M1066, 2006 4 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6654A?
6654A is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-430-3264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6654A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026