PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 66462
66462 ✓ Verified by PartsTable
Hama · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a Hama tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL RETAINER, special_features: SEVEN NOTCHES SPACED 1/16 WIDE X 1/32 DEEP WTH WITH 1/32 RADIUS, peripheral_diameter: 12.000 INCHES NOMINAL IN, center_hole_diameter: 11.594 INCHES NOMINAL IN, cross-sectional_height: 0.485 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
66462
NSN: 3110-00-100-0608
FSC: 3110
CAGE: 72260 — CORBITT CO INC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL RETAINER
special_featuresSEVEN NOTCHES SPACED 1/16 WIDE X 1/32 DEEP WTH WITH 1/32 RADIUS
peripheral_diameter12.000 INCHES NOMINAL IN
center_hole_diameter11.594 INCHES NOMINAL IN
cross-sectional_height0.485 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationKOPPERS K30B FSCM 75370 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN3110-00-100-0608
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 66462 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 4.6250 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER4.6250 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
SPECIAL FEATURESSTEEP ANGLE
OVERALL WIDTH0.9375 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
346-10010Interchangeable
interchangeable cross-reference
interchangeable
0003.0032.KInterchangeable
interchangeable cross-reference
interchangeable
AN935C10LInterchangeable
interchangeable cross-reference
interchangeable
71562Interchangeable
interchangeable cross-reference
interchangeable
7844058P011Interchangeable
interchangeable cross-reference
interchangeable
JA005AA300AAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 66462?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 66462?
66462 is a CUP,TAPERED ROLLER BEARING manufactured by Hama.
What parts can replace 66462?
There are 26 known substitutes for 66462: 346-10010, 0003.0032.K, AN935C10L and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 66462?
66462 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 66462

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026