PartsTable
Technical Data Sheet
PartsTable / MRO / 66386
66386 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Max. Thickness of Passepartouts: 1.7 mm<br>Type of Glass: Reflex<br>Border / Width: approx. 13 mm<br>Line: Sevilla Dekor<br>Frame Size: 30 x 30 cm<br>Picture Size: 20 x 20 cm<br>Colour: Gold.

Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 3.280 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.370 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN, actuator_type: DOUBLE ENDED SHAFT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-310-9081, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 66386
NSN: 5330-00-310-9081
FSC: 5330
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length3.280 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.370 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
actuator_typeDOUBLE ENDED SHAFT
body_diameter1.094 INCHES NOMINAL IN
overall_length3.812 INCHES NOMINAL IN
pilot_diameter0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM IN
shaft_diameter0.124 INCHES NOMINAL IN
shaft_end_play0.004 INCHES IN
undercut_width0.0570 INCHES NOMINAL IN
NSN5330-00-310-9081
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 66386 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
752-6362Interchangeable
interchangeable cross-reference
interchangeable
66386Interchangeable
interchangeable cross-reference
interchangeable
2810H21-032Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 66386?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 66386?
66386 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 66386?
There are 3 known substitutes for 66386: 752-6362, 66386, 2810H21-032. Substitute compatibility should be verified for your specific system.
Is 66386 still available?
66386 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 66386

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026