PartsTable
Technical Data Sheet
Download PDF

662R1-1 1-4 — LOOP,STRAP FASTENER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

662R1-1 1-4: LOOP,STRAP FASTENER.

The LOOP,STRAP FASTENER is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OR STEEL, hole_diameter: 0.190 INCHES NOMINAL IN, inside_height: 0.256 INCHES NOMINAL IN, inside_length: 1.281 INCHES NOMINAL IN, outside_width: 0.500 INCHES NOMINAL IN, painted_feature: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-897-2542, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
662R1-1 1-4
NSN: 5340-00-897-2542
FSC: 5340 — Hardware, Commercial
CAGE: 76786 — BUCKLES INTERNATIONAL, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY OR STEEL
hole_diameter0.190 INCHES NOMINAL IN
inside_height0.256 INCHES NOMINAL IN
inside_length1.281 INCHES NOMINAL IN
outside_width0.500 INCHES NOMINAL IN
painted_featureNOT INCLUDED
style_designatorFOOTMANS LOOP
center_to_center_distance_between_holes2.125 INCHES NOMINAL IN
NSN5340-00-897-2542
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 662R1-1 1-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE LENGTH: 1.281 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FOOTMANS LOOP
•
PAINTED FEATURE: NOT INCLUDED
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 2.125 INCHES NOMINAL IN
•
OUTSIDE WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OR STEEL
•
INSIDE HEIGHT: 0.256 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.190 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
INSIDE LENGTH1.281 INCHES NOMINAL IN
STYLE DESIGNATORFOOTMANS LOOP
PAINTED FEATURENOT INCLUDED
CENTER TO CENTER DISTANCE BETWEEN HOLES2.125 INCHES NOMINAL IN
OUTSIDE WIDTH0.500 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OR STEEL
INSIDE HEIGHT0.256 INCHES NOMINAL IN
HOLE DIAMETER0.190 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
662R1-1.25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 662R1-1 1-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 662R1-1 1-4?
662R1-1 1-4 is a LOOP,STRAP FASTENER.
What parts can replace 662R1-1 1-4?
There is 1 known substitute for 662R1-1 1-4: 662R1-1.25. Substitute compatibility should be verified for your specific system.
What is the NSN for 662R1-1 1-4?
662R1-1 1-4 is cataloged in the U.S. Government catalog under NSN 5340-00-897-2542. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 662R1-1 1-4