PartsTable / O-RING / 66271
66271
✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
- Fashionable plastic frame for digital prints<br>- Incl. pre-punched mount for digital picture format (13 x 17 cm)<br>- Ground, washed, high-quality glass<br>- Foliated plastic border for durable frame colours<br>- Precision mitre<br>- Hama EasyClip closure system for quick and easy framing This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-292-0580, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
66271
NSN: 5331-00-292-0580 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
hole_diameter 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 29.250 INCHES NOMINAL IN overall_length 24.453 INCHES NOMINAL IN special_features FIVE BOLT HOLES 0.687 IN. DIA IN bolt_hole_quantity 7 cross-sectional_thickness 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN NSN 5331-00-292-0580
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 66271
MFR: Hama
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER HOLE DIAMETER: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
10N30 Interchangeable interchangeable cross-reference
interchangeable
72001-1 Interchangeable interchangeable cross-reference
interchangeable
72001 Interchangeable interchangeable cross-reference
interchangeable
41-2 Interchangeable interchangeable cross-reference
interchangeable
10-4102 Interchangeable interchangeable cross-reference
interchangeable
70122C1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 66271?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 66271?
66271 is a GASKET manufactured by Hama.
What parts can replace 66271?
There are 33 known substitutes for 66271: 10N30, 72001-1, 72001 and 30 more. Substitute compatibility should be verified for your specific system.
Is 66271 still available?
66271 is currently cancelled.