The Calibrator,multifun, cataloged under National Stock Number 6625-01-552-5368, is classified within Federal Supply Class 6625 (Electrical and Electronic Properties Measuring and Testing Instruments) of the Instruments and Laboratory Equipment group. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6625-01-552-5368 |
| Item Name | Calibrator,multifun |
| FSC / FSG | 6625 / 66 — Electrical and Electronic Properties Measuring and Testing Instruments |
| Status | ACTIVE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Shelf Life Code | 0 |
| Criticality Code | X |
| Unit of Issue | EA |
| Acquisition advice code | WS |
| Reference | Meaning |
|---|---|
| PD02LEEC86 | 3/1 Design control — primary reference U.S. Government activity |
NSN 6625-01-552-5368 is a Calibrator,multifun, classified under FSC 6625, Electrical and Electronic Properties Measuring and Testing Instruments. Status: active.
Key specifications for 6625-01-552-5368: Special Features: MINIMUM REQUIREMENTS ARE AS FOLLOWS: SHALL BE CLASS 1 IN ACCORDANCE WITH MIL-PRF-28800; SHALL BE SOLID STATE AND ENCLOSED TO PREVENT ELECTRICAL SHOCK, SHALL BE CAPABLE OF OPERATING IN THE VICINITY OF AIRCRAFT, VEHICLES AND ABOVE DECK APPLICATIONS, WARM UP TIME WILL NOT EXCEED 30 MINUTES, SHALL PRODUCE DC VOLTAGES, AC VOLTAGES, FREQUENCY, SHALL HAVE WIDEBAND CAPABILITY OF 10HZ TO 30MHZ AT 3MV TO 3.5V RMS, SHALL PRODUCE DC CURRENT FROM 220UA TO 2.2A, SHALL PRODUCE AC CURRENT FROM 220UA TO 2.2A, SHALL PROVIDE RESITANCE OF 1 OHM TO 100 MEGAOHMS IN A 1 - 1.9 SEQUENCE, RESISTORS SHALL NOT BE DAMAGED OR DEGRADED BY THE PEAK CURRENTS LISTED IN THE PURCHASE DESCRIPTION, SHALL HAVE IEEE-488-1978 AND BE ADDRESSABLE FROM THE REAR PANEL, HEIGHT WILL NOT EXCEED 7IN, DEPTH WILL BE 22.75IN FROM REAR FACE OF THE RACKMOUNT, CALIBRATOR PLUS RACK MOUNTING SHALL FIT IN STANDARD EIA 19 IN RACK, CONTROLS, HANDLES AND FITTINGS WILL NOT PROJECT MORE THAN 2 1/8 IN FROM REAR FACE OF RACKMOUNT MHz. 0 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.