The Voltmeter, cataloged under National Stock Number 6625-01-356-9312, is classified within Federal Supply Class 6625 (Electrical and Electronic Properties Measuring and Testing Instruments) of the Instruments and Laboratory Equipment group. The manufacturer of record is Hughes Corp Div Weschler Electric. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6625-01-356-9312 |
| Primary Part Number | 671B421A12 |
| Item Name | Voltmeter |
| FSC / FSG | 6625 / 66 — Electrical and Electronic Properties Measuring and Testing Instruments |
| Manufacturer | Hughes Corp Div Weschler Electric |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 THREADED STUD(S) |
| Meter Body Diameter Behind Mounting Flange | 3.980 INCHES MAXIMUM IN |
| FSC Application Data | TEST SET,ELECT. EQUIP. |
| Indicator Type | DIAL W/POINTER |
| Mounting Arrangement Style | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| Circuit Attachment Method and Quantity | 2 THREADED STUD |
| Meter Depth Behind Mounting Flange | 9.000 INCHES MAXIMUM IN |
| Circuit Current for Which Designed | DC |
| Movement Type | MOVING COIL, PERMANENT MAGNET |
| Accuracy in Percent | -1.5 TO 1.5 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
| Center to Center Distance Between Mounting Facilities Parallel to Length | 3.346 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN |
| Mounting Stud Diameter | 0.250 INCHES NOMINAL IN |
| Dielectric Withstanding Voltage in Volts | 2600.0 |
| Power Source | EXTERNAL |
| Style Designator | RECTANGULAR FLUSH MTG |
| Features Provided | ELECTRICAL OVERLOAD PROTECTION AND EXTERNAL SHUNTING AND MAGNETIC SHIELD AND ZERO ADJUSTER |
| Specification/standard Data | 81349-MIL-M-16034/1 GOVERNMENT SPECIFICATION |
| Scale Division Quantity | 15 SINGLE INDICATOR SINGLE RANGE |
| Movement Suspension Method | JEWEL PIVOT BASE |
| Color | UNABLE TO DECODE |
| Pointer Color | BLACK SINGLE INDICATOR SINGLE RANGE |
| Surface Treatment | PAINT |
| Environmental Protection | COLD RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATERTIGHT |
| Mounting Stud Length | 0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Center to Center Distance Between Mounting Facilities Parallel to Width | 3.346 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-M-16034 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Shelf Life Code | 0 |
| Criticality Code | X |
| Unit of Issue | EA |
| Acquisition advice code | J |
| Part Number | Manufacturer |
|---|---|
| 671B421A12 PRIMARY | Hughes Corp Div Weschler Electric (USA) |
| Reference | Meaning |
|---|---|
| MIL-M-16034/1 | 5/9 Secondary reference U.S. Government activity |
| MR49W015DCVVH | 5/9 Secondary reference U.S. Government activity |
| MIL-DTL-16034/1 | 4/1 Identification reference U.S. Government activity |
NSN 6625-01-356-9312 is a Voltmeter, manufactured by Hughes Corp Div Weschler Electric, classified under FSC 6625, Electrical and Electronic Properties Measuring and Testing Instruments. Status: active.
NSN 6625-01-356-9312 has 1 manufacturer part number on file: 671B421A12 (Hughes Corp Div Weschler Electric).
Key specifications for 671B421A12: Mounting Facility Type and Quantity: 4 THREADED STUD(S); Meter Body Diameter Behind Mounting Flange: 3.980 INCHES MAXIMUM IN; Overall Height: 4.250 INCHES MINIMUM AND 4.750 INCHES MAXIMUM IN; FSC Application Data: TEST SET,ELECT. EQUIP.. 26 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.