PartsTable TECHNICAL DATA SHEET
NSN 6625-01-307-7304Government record, cited

Meter, Arbitrary Scale6625-01-307-7304

NSN 6625-01-307-7304 · NIIN 013077304 · Part number LO4124
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) · FSC 6625 — Electrical and Electronic Properties Measuring and Testing Instruments · FSG 66 — Instruments and Laboratory Equipment · CAGE 16236
Government record, cited
NSN 6625-01-307-7304 — this item is cataloged by the U.S. Government under National Stock Number 6625-01-307-7304. Manufacturer of record part number: LO4124.
Also searched as  6625-01-307-7304 · 6625013077304 · NIIN 013077304 · 01-307-7304 · FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments · CAGE 16236 · LO4124 · X2174
Nearby stock numbers  ·
Features
  • Meter,arbitrary Scale — FSC 6625
  • Mounting Facility Type and Quantity: 4 THREADED STUD(S)
  • Meter Body Diameter Behind Mounting Flange: 3.980 INCHES MAXIMUM IN
  • FSC Application Data: TEST SET,ELECT. EQUIP.
  • Indicator Type: DIAL W/POINTER
  • Mounting Arrangement Style: FOUR HOLE/STUD RECTANGULAR/SQUARE
  • Circuit Attachment Method and Quantity: 2 THREADED STUD
  • Meter Depth Behind Mounting Flange: 9.000 INCHES MAXIMUM IN
Identification
  • NSN: 6625-01-307-7304
  • NIIN: 013077304
  • FSC: 6625 — Electrical and Electronic Properties Measuring and Testing Instruments
  • FSG: 66 — Instruments and Laboratory Equipment
  • Primary part number: LO4124
  • Manufacturer: Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
General Description

The Meter,arbitrary Scale, cataloged under National Stock Number 6625-01-307-7304, is classified within Federal Supply Class 6625 (Electrical and Electronic Properties Measuring and Testing Instruments) of the Instruments and Laboratory Equipment group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6625-01-307-7304
Primary Part NumberLO4124
Item NameMeter,arbitrary Scale
FSC / FSG6625 / 66 — Electrical and Electronic Properties Measuring and Testing Instruments
ManufacturerDla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
StatusACTIVE
Mounting Facility Type and Quantity4 THREADED STUD(S)
Meter Body Diameter Behind Mounting Flange3.980 INCHES MAXIMUM IN
FSC Application DataTEST SET,ELECT. EQUIP.
Indicator TypeDIAL W/POINTER
Mounting Arrangement StyleFOUR HOLE/STUD RECTANGULAR/SQUARE
Circuit Attachment Method and Quantity2 THREADED STUD
Meter Depth Behind Mounting Flange9.000 INCHES MAXIMUM IN
Circuit Current for Which DesignedDC
Accuracy in Percent-1.5 TO 1.5 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
Center to Center Distance Between Mounting Facilities Parallel to Length3.346 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN
Mounting Stud Diameter0.250 INCHES NOMINAL IN
Special Test FeaturesCONFORMS TO MIL-M-16034/2
Dielectric Withstanding Voltage in Volts2600.0
Supplementary FeaturesRUGGEDIZED; FRICTION EFFECT RESISTANT
Criticality Code JustificationZZZY
Style DesignatorRECTANGULAR FLUSH MTG
Features ProvidedELECTRICAL OVERLOAD PROTECTION AND MAGNETIC SHIELD AND ZERO ADJUSTER
Scale Division Quantity32 SINGLE INDICATOR SINGLE RANGE
ColorUNABLE TO DECODE
Pointer ColorBLACK SINGLE INDICATOR SINGLE RANGE
Surface TreatmentPAINT
Environmental ProtectionDUST RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT
Mounting Stud Length0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Unable to DecodeUNABLE TO DECODE
Center to Center Distance Between Mounting Facilities Parallel to Width3.346 INCHES MINIMUM AND 3.406 INCHES MAXIMUM IN
Dial Scale Marking ColorBLACK SINGLE INDICATOR SINGLE RANGE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Shelf Life Code0
Criticality CodeS
Unit of IssueEA
Acquisition advice codeX
Weight3.7700 lbs
Cube0.1458 cu ft
Cross-Reference Index
Part NumberManufacturer
LO4124 Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA)
Reference documents
ReferenceMeaning
X2174 3/1 Design control — primary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 6625-01-307-7304?

NSN 6625-01-307-7304 is a Meter,arbitrary Scale, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 6625, Electrical and Electronic Properties Measuring and Testing Instruments. Status: active.

What part numbers are listed for NSN 6625-01-307-7304?

NSN 6625-01-307-7304 has 1 manufacturer part number on file: LO4124 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).

What are the specifications of LO4124?

Key specifications for LO4124: Mounting Facility Type and Quantity: 4 THREADED STUD(S); Meter Body Diameter Behind Mounting Flange: 3.980 INCHES MAXIMUM IN; Overall Height: 4.250 INCHES MINIMUM AND 4.750 INCHES MAXIMUM IN; FSC Application Data: TEST SET,ELECT. EQUIP.. 26 specifications are documented in the U.S. Government catalog.

Is NSN 6625-01-307-7304 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com