PartsTable TECHNICAL DATA SHEET
NSN 6625-01-033-5486Government record, cited

Multimeter6625-01-033-5486

NSN 6625-01-033-5486 · NIIN 010335486 · Part number 631-13828
Phaostron Instrument and Electronic Company · FSC 6625 — Electrical and Electronic Properties Measuring and Testing Instruments · FSG 66 — Instruments and Laboratory Equipment · CAGE 77221
Government record, cited
NSN 6625-01-033-5486 — this item is cataloged by the U.S. Government under National Stock Number 6625-01-033-5486. Manufacturer of record part number: 631-13828.
Also searched as  6625-01-033-5486 · 6625010335486 · NIIN 010335486 · 01-033-5486 · FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments · CAGE 77221 · 631-13828 · SM-D-157883 · AED-N30542-1A
Nearby stock numbers  ·
Features
  • Multimeter — FSC 6625
  • Mounting Facility Type and Quantity: 3 UNTHREADED HOLE(S)
  • Meter Body Diameter Behind Mounting Flange: 2.800 INCHES MAXIMUM IN
  • FSC Application Data: TEST SET,ELECT. EQUIP
  • Indicator Type: DIAL W/POINTER
  • Mounting Arrangement Style: THREE HOLE/STUD BOLT CIRCLE
  • Circuit Attachment Method and Quantity: 2 THREADED STUD
  • Meter Depth Behind Mounting Flange: 1.250 INCHES MAXIMUM IN
Identification
  • NSN: 6625-01-033-5486
  • NIIN: 010335486
  • FSC: 6625 — Electrical and Electronic Properties Measuring and Testing Instruments
  • FSG: 66 — Instruments and Laboratory Equipment
  • Primary part number: 631-13828
  • Manufacturer: Phaostron Instrument and Electronic Company
General Description

The Multimeter, cataloged under National Stock Number 6625-01-033-5486, is classified within Federal Supply Class 6625 (Electrical and Electronic Properties Measuring and Testing Instruments) of the Instruments and Laboratory Equipment group. The manufacturer of record is Phaostron Instrument and Electronic Company. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6625-01-033-5486
Primary Part Number631-13828
Item NameMultimeter
FSC / FSG6625 / 66 — Electrical and Electronic Properties Measuring and Testing Instruments
ManufacturerPhaostron Instrument and Electronic Company
StatusACTIVE
Mounting Facility Type and Quantity3 UNTHREADED HOLE(S)
Meter Body Diameter Behind Mounting Flange2.800 INCHES MAXIMUM IN
FSC Application DataTEST SET,ELECT. EQUIP
Indicator TypeDIAL W/POINTER
Mounting Arrangement StyleTHREE HOLE/STUD BOLT CIRCLE
Circuit Attachment Method and Quantity2 THREADED STUD
Meter Depth Behind Mounting Flange1.250 INCHES MAXIMUM IN
Circuit Current for Which DesignedAC
Scale Selection MethodTERMINAL
Movement TypeMOVING COIL, PERMANENT MAGNET
Accuracy in Percent-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES
Overall Diameter3.500 INCHES MAXIMUM IN
Dielectric Withstanding Voltage in Volts3000.0
Power SourceEXTERNAL
Style DesignatorROUND FLUSH MTG
Mounting Hole Diameter0.150 INCHES NOMINAL IN
Features ProvidedZERO ADJUSTER
Movement Suspension MethodJEWEL PIVOT BASE
Mounting Bolt Circle Diameter3.160 INCHES NOMINAL IN
ColorUNABLE TO DECODE
Pointer ColorBLACK SINGLE INDICATOR ALL RANGES
Environmental ProtectionAIRTIGHT AND DUST RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND SALT SPRAY RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
Dial Scale Marking ColorBLACK AND GREEN AND RED SINGLE INDICATOR ALL RANGES
Special MarkingsON BACK BY TERMINALS,SEALED DO NOT OPEN; BLACK VOLTS SCALE CHARACTERS; GREEN OHM SCALE CHARACTERS; RED LINES 10 VOLTS SCALE ONLY
MaterialPLASTIC
Sensitivity Rating50.0 MICROAMPERES
Scale Graduation TypeNONLINEAR SINGLE INDICATOR ALL RANGES
Measurement Range+0.0 TO 10.0 VOLTS, DC SINGLE INDICATOR THIRD RANGE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Shelf Life Code0
Criticality CodeX
Unit of IssueEA
Acquisition advice codeJN
Weight0.0500 lbs
Cube0.0250 cu ft
Cross-Reference Index
Part NumberManufacturer
631-13828 Phaostron Instrument and Electronic Company (USA)
AED-N30542-1A Jewell Instruments Llc (USA)
Reference documents
ReferenceMeaning
SM-D-157883 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 6625 — Electrical and Electronic Properties Measuring and Testing Instruments
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
6625-00-000-0309
6625-00-000-0309 · Item name not on file
6625-00-000-0480
6625-00-000-0480 · Item name not on file
6625-00-001-1338
6625-00-001-1338 · Item name not on file
6625-00-001-1341
6625-00-001-1341 · Item name not on file
6625-00-001-1371
6625-00-001-1371 · Item name not on file
6625-00-001-1373
6625-00-001-1373 · Item name not on file
6625-00-001-1374
6625-00-001-1374 · Item name not on file
6625-00-001-1377
SWEEP GENERATOR SUBASSEMBLY

Frequently Asked Questions

What is NSN 6625-01-033-5486?

NSN 6625-01-033-5486 is a Multimeter, manufactured by Phaostron Instrument and Electronic Company, classified under FSC 6625, Electrical and Electronic Properties Measuring and Testing Instruments. Status: active.

What part numbers are listed for NSN 6625-01-033-5486?

NSN 6625-01-033-5486 has 2 manufacturer part numbers on file: 631-13828 (Phaostron Instrument and Electronic Company), AED-N30542-1A (Jewell Instruments Llc).

What are the specifications of 631-13828?

Key specifications for 631-13828: Mounting Facility Type and Quantity: 3 UNTHREADED HOLE(S); Meter Body Diameter Behind Mounting Flange: 2.800 INCHES MAXIMUM IN; FSC Application Data: TEST SET,ELECT. EQUIP; Indicator Type: DIAL W/POINTER. 28 specifications are documented in the U.S. Government catalog.

Is NSN 6625-01-033-5486 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com