PartsTable TECHNICAL DATA SHEET
NSN 6625-00-892-5318Government record, cited

Voltmeter6625-00-892-5318

NSN 6625-00-892-5318 · NIIN 008925318 · Part number 16-5447
Jewell Instruments Llc · FSC 6625 — Electrical and Electronic Properties Measuring and Testing Instruments · FSG 66 — Instruments and Laboratory Equipment · CAGE 33005
Government record, cited
NSN 6625-00-892-5318 — this item is cataloged by the U.S. Government under National Stock Number 6625-00-892-5318. Manufacturer of record part number: 16-5447.
Also searched as  6625-00-892-5318 · 6625008925318 · NIIN 008925318 · 00-892-5318 · FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments · CAGE 33005 · 16-5447 · MR36W300ACVVR · 458-5076-30 · 378-0222
Nearby stock numbers  ·
Features
  • Voltmeter — FSC 6625
  • Mounting Facility Type and Quantity: 3 UNTHREADED HOLE(S)
  • Meter Body Diameter Behind Mounting Flange: 2.800 INCHES MAXIMUM IN
  • FSC Application Data: TEST SET ELECTRONIC
  • Indicator Type: DIAL W/POINTER
  • Mounting Arrangement Style: THREE HOLE/STUD BOLT CIRCLE
  • Circuit Attachment Method and Quantity: 2 THREADED STUD AND 2 SOLDER LUG
  • Meter Depth Behind Mounting Flange: 2.450 INCHES MAXIMUM IN
Identification
  • NSN: 6625-00-892-5318
  • NIIN: 008925318
  • FSC: 6625 — Electrical and Electronic Properties Measuring and Testing Instruments
  • FSG: 66 — Instruments and Laboratory Equipment
  • Primary part number: 16-5447
  • Manufacturer: Jewell Instruments Llc
General Description

The Voltmeter, cataloged under National Stock Number 6625-00-892-5318, is classified within Federal Supply Class 6625 (Electrical and Electronic Properties Measuring and Testing Instruments) of the Instruments and Laboratory Equipment group. The manufacturer of record is Jewell Instruments Llc. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6625-00-892-5318
Primary Part Number16-5447
Item NameVoltmeter
FSC / FSG6625 / 66 — Electrical and Electronic Properties Measuring and Testing Instruments
ManufacturerJewell Instruments Llc
StatusACTIVE
Mounting Facility Type and Quantity3 UNTHREADED HOLE(S)
Meter Body Diameter Behind Mounting Flange2.800 INCHES MAXIMUM IN
FSC Application DataTEST SET ELECTRONIC
Indicator TypeDIAL W/POINTER
Mounting Arrangement StyleTHREE HOLE/STUD BOLT CIRCLE
Circuit Attachment Method and Quantity2 THREADED STUD AND 2 SOLDER LUG
Meter Depth Behind Mounting Flange2.450 INCHES MAXIMUM IN
Circuit Current for Which DesignedAC
Scale Selection MethodTERMINAL
Movement TypeMOVING IRON VANE
Accuracy in Percent-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES
Overall Diameter3.510 INCHES MAXIMUM IN
Dielectric Withstanding Voltage in Volts3000.0
Power SourceEXTERNAL
Style DesignatorROUND FLUSH MTG
Mounting Hole Diameter0.143 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
Features ProvidedZERO ADJUSTER
Departure From Cited DesignatorAS MODIFIED BY MEASUREMENT RANGE PER INDICATOR
Movement Suspension MethodJEWEL PIVOT BASE
Mounting Bolt Circle Diameter3.160 INCHES NOMINAL IN
ColorUNABLE TO DECODE
Pointer ColorBLACK SINGLE INDICATOR ALL RANGES
Surface TreatmentENAMEL SEMIGLOSS
Environmental ProtectionDUSTPROOF
Test Data Document81349-MIL-M-10304 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Dial Scale Marking ColorBLACK SINGLE INDICATOR ALL RANGES
Special MarkingsRED LINE AT 120V AND 208V,150V SCALE MARKED SINGLE PHASE,300V SCALE MARKED THREE PHASE V
MaterialSTEEL
Sensitivity Rating4.0 OHMS PER VOLT
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Shelf Life Code0
Criticality CodeX
Unit of IssueEA
Acquisition advice codeJZ
Weight0.3500 lbs
Cube0.0579 cu ft
Cross-Reference Index
Part NumberManufacturer
16-5447 PRIMARY Jewell Instruments Llc (USA)
458-5076-30 Continental Electronics Corp (USA)
Reference documents
ReferenceMeaning
MR36W300ACVVR 5/1 Secondary reference
U.S. Government activity
378-0222 5/9 Secondary reference
Continental Electronics Corp

Frequently Asked Questions

What is NSN 6625-00-892-5318?

NSN 6625-00-892-5318 is a Voltmeter, manufactured by Jewell Instruments Llc, classified under FSC 6625, Electrical and Electronic Properties Measuring and Testing Instruments. Status: active.

What part numbers are listed for NSN 6625-00-892-5318?

NSN 6625-00-892-5318 has 2 manufacturer part numbers on file: 16-5447 (Jewell Instruments Llc), 458-5076-30 (Continental Electronics Corp).

What are the specifications of 16-5447?

Key specifications for 16-5447: Mounting Facility Type and Quantity: 3 UNTHREADED HOLE(S); Meter Body Diameter Behind Mounting Flange: 2.800 INCHES MAXIMUM IN; FSC Application Data: TEST SET ELECTRONIC; Indicator Type: DIAL W/POINTER. 29 specifications are documented in the U.S. Government catalog.

Is NSN 6625-00-892-5318 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com