PartsTable TECHNICAL DATA SHEET
NSN 6625-00-808-0519Government record, cited

Voltmeter6625-00-808-0519

NSN 6625-00-808-0519 · NIIN 008080519 · Part number 1446
Jewell Instruments Llc · FSC 6625 — Electrical and Electronic Properties Measuring and Testing Instruments · FSG 66 — Instruments and Laboratory Equipment · CAGE 33005
Government record, cited
NSN 6625-00-808-0519 — this item is cataloged by the U.S. Government under National Stock Number 6625-00-808-0519. Manufacturer of record part number: 1446.
Also searched as  6625-00-808-0519 · 6625008080519 · NIIN 008080519 · 00-808-0519 · FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments · CAGE 33005 · 1446 · 907-229 · DR7174G1 · 248759 · 964-0-150VAC · 248759-0-150VAC
Nearby stock numbers  ·
Features
  • Voltmeter — FSC 6625
  • Mounting Facility Type and Quantity: 4 THREADED STUD(S)
  • Meter Body Diameter Behind Mounting Flange: 3.250 INCHES NOMINAL IN
  • FSC Application Data: TEST SET,ELECTRONIC EQUIP.
  • Phase: SINGLE
  • Indicator Type: DIAL W/POINTER
  • Mounting Arrangement Style: FOUR HOLE/STUD RECTANGULAR/SQUARE
  • Circuit Attachment Method and Quantity: 2 THREADED STUD
Identification
  • NSN: 6625-00-808-0519
  • NIIN: 008080519
  • FSC: 6625 — Electrical and Electronic Properties Measuring and Testing Instruments
  • FSG: 66 — Instruments and Laboratory Equipment
  • Primary part number: 1446
  • Manufacturer: Jewell Instruments Llc
General Description

The Voltmeter, cataloged under National Stock Number 6625-00-808-0519, is classified within Federal Supply Class 6625 (Electrical and Electronic Properties Measuring and Testing Instruments) of the Instruments and Laboratory Equipment group. The manufacturer of record is Jewell Instruments Llc. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN6625-00-808-0519
Primary Part Number1446
Item NameVoltmeter
FSC / FSG6625 / 66 — Electrical and Electronic Properties Measuring and Testing Instruments
ManufacturerJewell Instruments Llc
StatusACTIVE
Mounting Facility Type and Quantity4 THREADED STUD(S)
Meter Body Diameter Behind Mounting Flange3.250 INCHES NOMINAL IN
FSC Application DataTEST SET,ELECTRONIC EQUIP.
PhaseSINGLE
Indicator TypeDIAL W/POINTER
Mounting Arrangement StyleFOUR HOLE/STUD RECTANGULAR/SQUARE
Circuit Attachment Method and Quantity2 THREADED STUD
Meter Depth Behind Mounting Flange1.090 INCHES NOMINAL IN
Circuit Current for Which DesignedAC
Movement TypeMOVING IRON VANE
Accuracy in Percent-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
Center to Center Distance Between Mounting Facilities Parallel to Length3.040 INCHES NOMINAL IN
Mounting Stud Diameter0.138 INCHES NOMINAL IN
Power SourceEXTERNAL
Style DesignatorRECTANGULAR FLUSH MTG
Features ProvidedZERO ADJUSTER
Movement Suspension MethodJEWEL PIVOT BASE
ColorUNABLE TO DECODE
Pointer ColorBLACK SINGLE INDICATOR SINGLE RANGE
Mounting Stud Length0.650 INCHES NOMINAL IN
Frequency Rating60.0 HERTZ NOMINAL
Center to Center Distance Between Mounting Facilities Parallel to Width2.670 INCHES NOMINAL IN
Dial Scale Marking ColorBLACK SINGLE INDICATOR SINGLE RANGE
MaterialPLASTIC
Sensitivity Rating135.0 OHMS PER VOLT
Scale Graduation TypeNONLINEAR SINGLE INDICATOR SINGLE RANGE
Frequency Response Range+25.000 TO 125.000 HERTZ
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5998-01-349-82861446 POSSIBLE MATCH
CIRCUIT CARD ASSEMBLY
Possible match (shared part number)Vaisala Inc.
5935-01-425-4521248759 POSSIBLE MATCH
CONNECTOR,RECEPTACLE,ELECTRICAL
Possible match (shared part number)Nsgdatacom Inc
Cross-Reference Index
Part NumberManufacturer
907-229 Jewell Instruments Llc (USA)
DR7174G1 Superior Electric Holding Group Llc Div Specialty Product Technologies (USA)
1446 PRIMARY Jewell Instruments Llc (USA)
Reference documents
ReferenceMeaning
248759 5/9 Secondary reference
Solartron Electronics Inc Weston Instruments Div
964-0-150VAC 5/9 Secondary reference
Solartron Electronics Inc Weston Instruments Div
248759-0-150VAC 5/9 Secondary reference
Solartron Electronics Inc Weston Instruments Div
Related Parts
5998-01-349-8286POSSIBLE MATCH
CIRCUIT CARD ASSEMBLY
1446
5935-01-425-4521POSSIBLE MATCH
CONNECTOR,RECEPTACLE,ELECTRICAL
248759

Frequently Asked Questions

What is NSN 6625-00-808-0519?

NSN 6625-00-808-0519 is a Voltmeter, manufactured by Jewell Instruments Llc, classified under FSC 6625, Electrical and Electronic Properties Measuring and Testing Instruments. Status: active.

What part numbers are listed for NSN 6625-00-808-0519?

NSN 6625-00-808-0519 has 3 manufacturer part numbers on file: 907-229 (Jewell Instruments Llc), DR7174G1 (Superior Electric Holding Group Llc Div Specialty Product Technologies), 1446 (Jewell Instruments Llc).

What NSN replaces 6625-00-808-0519?

2 possible matches (shared part number, not a government interchangeability claim): 5998-01-349-8286, 5935-01-425-4521. Verify interchangeability with system specifications before substitution.

What are the specifications of 1446?

Key specifications for 1446: Mounting Facility Type and Quantity: 4 THREADED STUD(S); Meter Body Diameter Behind Mounting Flange: 3.250 INCHES NOMINAL IN; Overall Height: 3.940 INCHES NOMINAL IN; FSC Application Data: TEST SET,ELECTRONIC EQUIP.. 27 specifications are documented in the U.S. Government catalog.

Is NSN 6625-00-808-0519 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com