The Shunt,instrument, cataloged under National Stock Number 6625-00-720-2854, is classified within Federal Supply Class 6625 (No Item Name Available) of the Instruments and Laboratory Equipment group. The primary manufacturer of record is Federal Commercial Item Description Promulgated by General Services Administration Washington DC. Government technical data includes 24 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 10 commercial cross-references from 7 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6625-00-720-2854 |
| Primary Part Number | AA55524/2-005 |
| Item Name | Shunt,instrument |
| FSC / FSG | 6625 / 66 — No Item Name Available |
| Manufacturer | Federal Commercial Item Description Promulgated by General Services Administration Washington DC |
| Status | CANCELLED |
| Unthreaded Mounting Hole Diameter | 0.205 INCHES NOMINAL IN |
| Usage Design | EXTERNAL |
| Center to Center Distance Between Mounting Facilities Parallel to Width | 1.250 INCHES NOMINAL IN |
| Special Markings | 50 MV,400 AMP |
| Terminal Type and Quantity | 4 SCREW |
| Terminal Location | BOTH SIDES |
| Current Rating and Type | 400.0 AMPERES NOMINAL DC |
| Voltage Drop in Millivolts | 50.0 NOMINAL |
| Criticality Code Justification | FEAT |
| FSC Application Data | ELECTRICAL,ELECTRONIC PROPERTIES MEASURING AND TEST INSTRUMENTS |
| Cubic Measure | 9.953 CUBIC INCHES |
| Mounting Method | UNTHREADED HOLE(S) |
| Test Data Document | 58536-A-A-55524 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Specification/standard Data | 58536-A-A-55524/2 GOVERNMENT SPECIFICATION |
| Furnished Items and Quantity | PLAIN WASHER 4; BRASS WASHER 2 |
| Mounting Provision Quantity | 2 |
| Reliability Indicator | NOT ESTABLISHED |
| Accuracy in Percent | -0.5 TO 0.5 AT FULL SCALE |
| Unthreaded Mounting Hole Diameter | 0.205 INCHES NOMINAL IN |
| Usage Design | EXTERNAL |
| Center to Center Distance Between Mounting Facilities Parallel to Width | 1.250 INCHES NOMINAL IN |
| Special Markings | 50 MV,400 AMP |
| Terminal Type and Quantity | 4 SCREW |
| Terminal Location | BOTH SIDES |
| Acquisition Status | CANCELLED |
| Successor | 6625-00-500-8890 (MSB401) |
| HAZMAT | No |
| Shelf Life Code | 0 |
| Criticality Code | N |
| Unit of Issue | EA |
| SMR Code | ZN |
| Weight | 0.2500 lbs |
| Cube | 0.0069 cu ft |
| Part Number | Manufacturer |
|---|---|
| AA55524/2-005 | Federal Commercial Item Description Promulgated by General Services Administration Washington DC (USA) |
| MLB400-50 | Empro Manufacturing Co Inc Dba Empro Shunts (USA) |
| MS91587-5 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| A-A-55524/2 | Federal Commercial Item Description Promulgated by General Services Administration Washington DC (USA) |
| MIL-S-61 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| L01541 | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| MSB401 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| 136403108 | Eaton Corporation (USA) |
| MSB401 | Department of the Air Force (USA) |
| MSB401 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 6625-00-720-2854 is a Shunt,instrument, manufactured by Federal Commercial Item Description Promulgated by General Services Administration Washington DC, classified under FSC 6625 (No Item Name Available). Status: cancelled.
NSN 6625-00-720-2854 has 10 cross-referenced part numbers: AA55524/2-005 (Federal Commercial Item Description Promulgated by General Services Administration Washington DC), MLB400-50 (Empro Manufacturing Co Inc Dba Empro Shunts), MS91587-5 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), A-A-55524/2 (Federal Commercial Item Description Promulgated by General Services Administration Washington DC), MIL-S-61 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M) and 5 more.
There are 12 known substitutes for 6625-00-720-2854: 6625-00-500-8890, 6625-00-060-1213, 6625-00-166-1002 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for AA55524/2-005: Unthreaded Mounting Hole Diameter: 0.205 INCHES NOMINAL IN; Usage Design: EXTERNAL; Overall Height: 1.750 INCHES NOMINAL IN; Center to Center Distance Between Mounting Facilities Parallel to Width: 1.250 INCHES NOMINAL IN. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 6625-00-720-2854 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.