PartsTable TECHNICAL DATA SHEET
NSN 6625-00-581-2641Government record, cited

Ammeter6625-00-581-2641

NSN 6625-00-581-2641 · NIIN 005812641
FSC 6625 — Electrical and Electronic Properties Measuring and Testing Instruments · FSG 66 — Instruments and Laboratory Equipment
Government record, cited
Also searched as  6625-00-581-2641 · 6625005812641 · NIIN 005812641 · 00-581-2641 · FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments · MR26W152SPECR · MIL-M-10304/9 · MIL-PRF-10304/9 · 331C146H01 · 331C146H01
Nearby stock numbers  ·
Features
  • Ammeter — FSC 6625
  • Circuit Construction Type: NONELECTRONIC
  • Mounting Facility Type and Quantity: 3 SCREW AND 3 UNTHREADED HOLE(S)
  • Meter Body Diameter Behind Mounting Flange: 2.210 INCHES MAXIMUM IN
  • FSC Application Data: TEST SET,ELECT. EQUIP.
  • Indicator Type: DIAL W/POINTER
  • Mounting Arrangement Style: THREE HOLE/STUD BOLT CIRCLE
  • Circuit Attachment Method and Quantity: 2 SOLDER LUG AND 2 THREADED STUD
Identification
  • NSN: 6625-00-581-2641
  • NIIN: 005812641
  • FSC: 6625 — Electrical and Electronic Properties Measuring and Testing Instruments
  • FSG: 66 — Instruments and Laboratory Equipment
General Description

The Ammeter, cataloged under National Stock Number 6625-00-581-2641, is classified within Federal Supply Class 6625 (Electrical and Electronic Properties Measuring and Testing Instruments) of the Instruments and Laboratory Equipment group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 6 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN6625-00-581-2641
Item NameAmmeter
FSC / FSG6625 / 66 — Electrical and Electronic Properties Measuring and Testing Instruments
StatusACTIVE
Circuit Construction TypeNONELECTRONIC
Mounting Facility Type and Quantity3 SCREW AND 3 UNTHREADED HOLE(S)
Meter Body Diameter Behind Mounting Flange2.210 INCHES MAXIMUM IN
FSC Application DataTEST SET,ELECT. EQUIP.
Indicator TypeDIAL W/POINTER
Mounting Arrangement StyleTHREE HOLE/STUD BOLT CIRCLE
Circuit Attachment Method and Quantity2 SOLDER LUG AND 2 THREADED STUD
Meter Depth Behind Mounting Flange1.600 INCHES MAXIMUM IN
Circuit Current for Which DesignedDC
Scale Selection MethodTERMINAL
Movement TypeMOVING COIL, PERMANENT MAGNET
Accuracy in Percent-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
Overall Diameter2.695 INCHES MAXIMUM IN
Panel for Which DesignedMAGNETIC
Dielectric Withstanding Voltage in Volts3000.0
Power SourceEXTERNAL
Style DesignatorROUND FLUSH MTG
Mounting Hole Diameter0.125 INCHES NOMINAL IN
Features ProvidedMAGNETIC SHIELD AND ZERO ADJUSTER
Specification/standard Data81349-MIL-M-10304/9 GOVERNMENT SPECIFICATION
Scale Division Quantity25 SINGLE INDICATOR SINGLE RANGE
Movement Suspension MethodJEWEL PIVOT BASE
Mounting Bolt Circle Diameter2.440 INCHES NOMINAL IN
ColorUNABLE TO DECODE
Pointer ColorBLACK SINGLE INDICATOR SINGLE RANGE
Surface TreatmentPAINT
Environmental ProtectionAIRTIGHT AND DUST RESISTANT AND FUNGUS RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT
Test Data Document81349-MIL-M-10304 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Weight0.6200 lbs
Cube0.0370 cu ft
⇄ Related Items 6
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
6625-00-581-2642 POSSIBLE MATCH
AMMETER
Possible match (shared part number)
6625-00-643-3057 POSSIBLE MATCH
AMMETER
Possible match (shared part number)
6625-00-702-2945 POSSIBLE MATCH
AMMETER
Possible match (shared part number)
6625-00-735-5155 POSSIBLE MATCH
AMMETER
Possible match (shared part number)
6625-00-892-4553 POSSIBLE MATCH
AMMETER
Possible match (shared part number)
6625-01-085-6667 POSSIBLE MATCH
AMMETER
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MR26W152SPECR 2/2 Government specification standardization
U.S. Government activity
MIL-M-10304/9 5/9 Secondary reference
U.S. Government activity
MIL-PRF-10304/9 4/1 Identification reference
U.S. Government activity
331C146H01 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
331C146H01 5/1 Secondary reference
Westinghouse Electric Corp
Related Parts
6625-00-581-2642POSSIBLE MATCH
AMMETER
6625-00-643-3057POSSIBLE MATCH
AMMETER
6625-00-702-2945POSSIBLE MATCH
AMMETER
6625-00-735-5155POSSIBLE MATCH
AMMETER
6625-00-892-4553POSSIBLE MATCH
AMMETER
6625-01-085-6667POSSIBLE MATCH
AMMETER

Frequently Asked Questions

What is NSN 6625-00-581-2641?

NSN 6625-00-581-2641 is a Ammeter, classified under FSC 6625, Electrical and Electronic Properties Measuring and Testing Instruments. Status: active.

What NSN replaces 6625-00-581-2641?

6 possible matches (shared part number, not a government interchangeability claim): 6625-00-581-2642, 6625-00-643-3057, 6625-00-702-2945. Verify interchangeability with system specifications before substitution.

What are the specifications of 6625-00-581-2641?

Key specifications for 6625-00-581-2641: Circuit Construction Type: NONELECTRONIC; Mounting Facility Type and Quantity: 3 SCREW AND 3 UNTHREADED HOLE(S); Meter Body Diameter Behind Mounting Flange: 2.210 INCHES MAXIMUM IN; FSC Application Data: TEST SET,ELECT. EQUIP.. 28 specifications are documented in the U.S. Government catalog.

Is NSN 6625-00-581-2641 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com