The Ammeter, cataloged under National Stock Number 6625-00-192-7679, is classified within Federal Supply Class 6625 (No Item Name Available) of the Instruments and Laboratory Equipment group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 28 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6625-00-192-7679 |
| Primary Part Number | MIL-DTL-16034/4 |
| Item Name | Ammeter |
| FSC / FSG | 6625 / 66 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Circuit Attachment Method and Quantity | 2 THREADED STUD |
| Mounting Stud Diameter | 0.250 INCHES NOMINAL IN |
| Pointer Color | BLACK SINGLE INDICATOR SINGLE RANGE |
| Scale Selection Method | SWITCH |
| Measurement Range | +0.0 TO 400.0 AMPERES, AC SINGLE INDICATOR SINGLE RANGE |
| Circuit Construction Type | NONELECTRONIC |
| Power Source | EXTERNAL |
| Frequency Response Range | +59.100 TO 60.900 HERTZ |
| Movement Type | MOVING IRON VANE |
| Scale Division Quantity | 40 SINGLE INDICATOR SINGLE RANGE |
| Scale Graduation Type | LINEAR SINGLE INDICATOR SINGLE RANGE |
| Features Provided | MAGNETIC SHIELD AND ZERO ADJUSTER |
| Accuracy in Percent | -1.5 TO 1.5 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
| Circuit Current for Which Designed | AC |
| Color | UNABLE TO DECODE |
| Mounting Arrangement Style | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| Meter Body Diameter Behind Mounting Flange | 3.980 INCHES MAXIMUM IN |
| Meter Depth Behind Mounting Flange | 10.000 INCHES MAXIMUM IN |
| Center to Center Distance Between Mounting Facilities Parallel to Width | 3.375 INCHES NOMINAL IN |
| Center to Center Distance Between Mounting Facilities Parallel to Length | 3.375 INCHES NOMINAL IN |
| Dial Scale Marking Color | BLACK SINGLE INDICATOR SINGLE RANGE |
| Movement Suspension Method | TAUT BAND |
| Mounting Stud Length | 0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Installation Design | PANEL |
| Indicator Type | DIAL W/POINTER |
| FSC Application Data | TEST SET ELECTRONIC |
| Mounting Facility Type and Quantity | 4 THREADED STUD(S) |
| Test Data Document | 81349-MIL-M-16034/4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Shelf Life Code | 0 |
| Unit of Issue | EA |
| SMR Code | J |
| Weight | 3.1100 lbs |
| Cube | 0.1253 cu ft |
| Part Number | Manufacturer |
|---|---|
| MIL-DTL-16034/4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MR49W400ACAAH | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-M-16034/4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 6625-00-192-7679 is a Ammeter, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 6625 (No Item Name Available). Status: active.
NSN 6625-00-192-7679 has 3 cross-referenced part numbers: MIL-DTL-16034/4 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MR49W400ACAAH (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-M-16034/4 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There is 1 known substitute for 6625-00-192-7679: 6625-00-186-8772. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-DTL-16034/4: Circuit Attachment Method and Quantity: 2 THREADED STUD; Mounting Stud Diameter: 0.250 INCHES NOMINAL IN; Pointer Color: BLACK SINGLE INDICATOR SINGLE RANGE; Scale Selection Method: SWITCH. 30 total characteristics are documented in the Federal Logistics Information System.