PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 66217
66217 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include phase: THREE, capacity: 200.0 GALLONS TANK, material: STEEL, overall_height: 79.000 INCHES NOMINAL IN, overall_diameter: 30.000 INCHES NOMINAL IN, attachment_device: INCLUDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0562, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
66217
NSN: 3110-00-100-0562
FSC: 3110
CAGE: 78640 — MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC (USA)
SPECIFICATIONS
phaseTHREE
capacity200.0 GALLONS TANK
materialSTEEL
overall_height79.000 INCHES NOMINAL IN
overall_diameter30.000 INCHES NOMINAL IN
attachment_deviceINCLUDED
insulated_featureINCLUDED
surface_treatmentENAMEL OUTSIDE
frequency_in_hertz60.0
operating_pressure100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
temp_rise_per_hour100.0 FAHRENHEIT DEGF
thermostatic_switchINCLUDED
NSN3110-00-100-0562
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 66217 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 3.0000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0469 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER3.0000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0469 INCHES NOMINAL IN
OVERALL WIDTH0.6105 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
188233Interchangeable
interchangeable cross-reference
interchangeable
66217Interchangeable
interchangeable cross-reference
interchangeable
CS022Interchangeable
interchangeable cross-reference
interchangeable
S457Interchangeable
interchangeable cross-reference
interchangeable
ST250L4AInterchangeable
interchangeable cross-reference
interchangeable
28300Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 66217?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 66217?
66217 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 66217?
There are 18 known substitutes for 66217: 188233, 66217, CS022 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 66217?
66217 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0562. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 66217

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026